What did you do to your navara today?

[Navmania]

Well on the way with my draws and fridge slide + cargo barriers. The centre section with the draw and fridge slide slides out so it can be used as a ute. I will do a thread on the whole setup when it's finished for those who are interested. Still need to paint and carpet some things.



Swivel fridge slide for easy access.

 

[houndour]

Well on the way with my draws and fridge slide + cargo barriers. The centre section with the draw and fridge slide slides out so it can be used as a ute. I will do a thread on the whole setup when it's finished for those who are interested. Still need to paint and carpet some things.

View attachment 10815

Swivel fridge slide for easy access.

very smart solution, im very interested on see how you did it.


greetings from Chile!!

 

[rabbit-chop]

Got any pictures mate. Have been looking at these for a while now.

Rusty

Took some snaps for ya!

 

[RustyNav09]

Thanks rabbit. I'm guessing it has a small filter inside like its bigger brothers?

Very neat install and is in location of my abs unfortunately. I still may be able to wiggle it into that position thought.

Thanks again

 

[rabbit-chop]

Yeah its got a filter inside it. Its pretty small, you'd be able to suss a spot for it.

 

[shan_b]

Today... I found three new dents in the tailgate!

 

[Navmania]

very smart solution, im very interested on see how you did it.

greetings from Chile!!

Mate it's a 300kg load rated lazy Suzan from bunnings. Easily dose the job. I will post some more pics when I get more done. This is a big project lots of small brackets and thing to make plus a lot of planing ahead so it all works.

 

[RustyNav09]

Yeah its got a filter inside it. Its pretty small, you'd be able to suss a spot for it.

May i ask where you gots yours from? I cant find anyone to buy off.
Rusty

 

[martySTR]

Rusty, i have purchased one but not fitted it. i got it from here:

http://www.ebay.com.au/itm/Small-oi...=AU_Car_Parts_Accessories&hash=item43bae203e8

 

[4x4 ST-R]

Nothing yet - But my body lift kit just arrived in the mail. So as soon as I finish painting the boat (once this rain pisses off) I can move it out of the way and fit it up.

 

[Bourke72]

Its still siting in the dealership waiting for a ERG Exhaust sensor to be replaced one month old

 

[rabbit-chop]

Recieved my chip this arvo, bewdy! Fitted it, bewdy! Now my clutch slips in 4th and 5th. so its when it should be

Is it a big job swapping out flywheel and clutch on a d22? Ive done it on other cars but never on a 4wd.
Anyone recommend a decent aftermarket heavy duty clutch and flywheel kit?

 

[gunning1987]

Dropped it off at ARB to get the rear locked up.

 

[Tyson25]

Fitted Brown Davis bash plate to my D40... should have done it before i bashed the sump! managed to just break the seal on the sump. nissan re-sealed it under warranty..... WINNING!

 

[Mairs]

turned down the steinbauer a notch

 

[zed]

damn I never stop - just added the 3" turbo back and wrapped it all up and insulated the firewall and heat shield that sits over the dump pipe (good ***** this stuff the shield is warm but not hot should help the intercooler when it gets fitted), added the pyro gauge port, now fitting boos,t pyro in a 3 pod pillar mount (not worth the $1fiddy but you don't know until it arrives huh thin vac moulded *****) ! the extra pod I was thinking about an aquamist injection kit from pommy land !Now fitting tray work lights, fridge power and an Anderson to the rear so the winch can be operated from the tow hitch as well !

 

[4x4 ST-R]

Left yet another bunnings receipt laying on the passenger seat after a shop. I swear there's at least 10 of those and about 8 supercheap receipts too. Anyone have a clutter of receipts around their Nav?

 

[Oz14zz]

Made a set of draws, took a couple of days still not 100% complete but done for now!

 

[rabbit-chop]

Rear cab glass was shattered by flying rock spat up from a vehicle comung the other direction on the hwy today. Yes the REAR glass. Rock mustv ricochetted off the ladder rack. The tint seems to be holding it all together for now.

Got quotes from two windscreen mobs - 550 and 650, both with a 7 day wait.

Scored glass from wrecker - $100

Spent an hour with a heat gun and a scraper and then rags and thinners getting all the bogan aussie pride stickers off.

Put some new tint on that i scored for $20 from autobahn half price. Its the perfect shade i wanted.

Tomorrow arvo after work the new glass goes in.

 

[rabbit-chop]

^Glass came up a treat, was an easy job. First time diy tint, no bubbles! Mirror fade, keeps sun off back of neck ay!

Got clutch fitted tueday, ramped the chip up two notches from original setting, thing was a torque monster!
EGTs were still low. But noticed a bit of smoke in headlights of car behind me the other night, so ramped it back down two notches from original setting today - actually much nicer like this - less brutal down low, much more linear delivery.
Filled up with a tank of BP. We'll see what the fuel consumption is like. Will click chip up a notch next tank.
Finally got around to putting some torsion bars in today.
When i got ute back from getting the clutch, hes resett the TBs to standard height when he put them back in, so i thought id finally just buy some aftermarket ones to go with the leafs and shocks (and winch and bullbar) iv had for some years now.
Ordered tough dog ones tues night - $250 ebay- they were on my door last night from NSW!
Bewdy, so thats what i spent this morning doing.
Ute drives grouse. very happy.