Back to stock, ride height.

[NobodyKnows]

Hey Brains Trust.
I need to return my pride and joy to its original ride height. I need to try and find some original or secondhand bushes for the body and tray. anyone know anywhere in Australia that would have any apart from Nissan also after how much of an effort this job is to return to standard right height.
Cheers legends

 

[MANNING]

Hey Mate,
Tell us more about what you have done in the past and what your returning the Nav to stock from.

There is a few answers that go thru my head but no point adding ideas and links if its not what your after

 

[NobodyKnows]

Hey Mate,
Tell us more about what you have done in the past and what your returning the Nav to stock from.

There is a few answers that go thru my head but no point adding ideas and links if its not what your after

2 “ suspension lift and had 2” body lift. In NSW apparently you can only go 75mm higher than stock, got defected and have to get full inspection before it’s removed

 

[MANNING]

Depending on what else you've got modified with the body lift.
I would recommend you just remove( temporary or not) the body lift.

You may have issues if you've adjusted bullbars, rear bar or steps to suit the body lift but wouldn't be the end of the world to remove most of that aswell.

The only thing you'll is shorter body bolts. The body blocks come out and the shorter bolts triage the longer ones. Six bolts either side 8 blocks. If you were more local to me i could offer up the ones I have.
Let me know if you need any more info on that removal