Matt's D22 Custom Tray

[d22dave]

What,s the exhaust set up on your ute matt

 

[Boosted]

Straight through 3" with dump pipe

 

[d22dave]

Local exhaust bloke or "name" brand

 

[Boosted]

I think the dump pipe is a name brand but the exhaust is custom

 

[d22dave]

Thanks, I got a price of a local exhaust place, But it was dump pipe back so i hadn,t bothered yet

 

[Boosted]

I think the dump pipe made the most difference cause the standard one looked pretty restrictive

 

[Ridgie]

Is it a 2.5 or 3l? Have you got a dump pipe? I got mine dynoed at 78kw with an exhaust

3ltr - with new dump pipe.

 

[Boosted]

Was it a pretty hot day when you run it?

Thought I might put up a pic of my dyno sheet. It was about 5 degress and about 11pm at night when I got it done

 

[Leprechaun]

Results of the dyno - 3rd gear, tyre pressures at 32.
Standard - 60kw.
Chip set at 5 - 70kw
Chip set at 7 - 76kw
add exhaust - 80.2kw.

34% increase, thats an awesome result.

Interesting that the exhaust didn't make much difference, but certainly still needed to keep the EGT under control.

 

[Boosted]

Just ordered my Lokka from 4wdsystems, unfortunetly they don't have any in stock and will have to wait to late next month to get it. Bummer

 

[Aido]

Matt. Could you if possible post up the important dimensions as a reference for others that are looking at building a tray? Most notably the dimensions of the mounts fore and aft plus width between them.

 

[Boosted]

Yeah that shouldnt be a hassle. Will probably post up on the weekend

 

[justdrinkbeer]

Hey mate, if this is a camping rig, i'd be incorporating a water tank & pressure pump into it, best mod i've done by far. I got lucky with mine, but you doing it from scratch shouldn't have any problems, and theres so much space under there

 

[justdrinkbeer]

Also, is that intercooler hard piping running through the wheel arch into the Bullbar on first pic?

 

[Boosted]

Hey mate, if this is a camping rig, i'd be incorporating a water tank & pressure pump into it, best mod i've done by far. I got lucky with mine, but you doing it from scratch shouldn't have any problems, and theres so much space under there

I'll be eventually getting a camper but I was going to put a tank underneath for washing hands etc. Plus there is going to be a 18L air compressor going under there

Also, is that intercooler hard piping running through the wheel arch into the Bullbar on first pic?

Yep sure is, I had to cut a hole in the bullbar mount (Not the best thing to do but i'll be making a new bullbar soon so its not to bad. I did have a engine bay cover in there but it went missing a few weeks ago

 

[ljacko78]

nice job Matt. I really like the angles on the roll bar for the tray and the box tubing. You painting it up?? Should see it in person pretty soon

 

[Boosted]

Thanks, I was thinking of doing the roll bar as tube but I thought box might give it a better look. My dad is a paint inspector in town so he knows a few good paint shops that will paint it for a carton

 

[Boosted]

Just thought to keep you all interested until the next update I might throw a few pics up of my other toy i've got.

Its a 47" mono hull race boat powered by a heavily modified 26cc zenoah engine (basically an angry whipper snipper engine) Top speed so far I have hit (still running it in) is about 74kph.

 

[Boosted]

 

[Boosted]

Oh yeah I forgot to mention my Lokka has been ordered and should be here by the end of next month