Programming a New Key 2011 D40

[DanielHowden]

Hi, I apologise if there is a running thread for this kind of question, I did search but couldn't find one.

I have a 2011 D40 and I would like to program a new key. I have tried the method of locking all the doors and then putting the new key in and out 10 times but I never get the indicators to flash. If I continue anyway and turn the key to ACC I get a "SECURE" message on the display screen.

Can anyone help please?

Thanks, Daniel.

 

[Old.Tony]

Hi, I apologise if there is a running thread for this kind of question, I did search but couldn't find one.

I have a 2011 D40 and I would like to program a new key. I have tried the method of locking all the doors and then putting the new key in and out 10 times but I never get the indicators to flash. If I continue anyway and turn the key to ACC I get a "SECURE" message on the display screen.

Can anyone help please?

Thanks, Daniel.

Reading the manual for the 2011 D40 - apparently the key ID needs to be registered with both the BCM and the ECM. The only way to do this (according to the documentation) appears to be with a CONSULT device.

Any mention of the new key registration (check page 71 of the file I've attached) advises the service person to refer to the CONSULT Operation Manual NATS.

Hopefully you'll find something in there that I've missed.

 

[Scott52]

Have a look at the Autel MaxiAP200. It reads codes in all modules plus I can confirm it will code keys, injectors and recode ECU's to suit the keys, BCM and immobiliser. They're about $AUD130 on eBay and other online sites and give close to Dealer level capability.

If you think this is for you make sure it's the AP200 not the cheaper reduced features AP200H, AP200C or AP200M

https://www.autel.com/mk1/3262.jhtml

 

[Michael Guyamin]

Hello. I own a 2018 Navara Calibre 4x2 MT. Can somebody with a ki d heart to share how to clone a key with chip. I had an original and planning to have a duicate. Thanks in advance.

 

[Scott52]

Hello. I own a 2018 Navara Calibre 4x2 MT. Can somebody with a ki d heart to share how to clone a key with chip. I had an original and planning to have a duicate. Thanks in advance.

I bought one of these for about $AUD100 and it programs keys and injectors. I used it on my 2011 D40 Navara to program a new key I purchased on Aliexpress.

https://www.autel.com/mk1/3262.jhtml

 

[Philip M]

I bought one of these for about $AUD100 and it programs keys and injectors. I used it on my 2011 D40 Navara to program a new key I purchased on Aliexpress.

https://www.autel.com/mk1/3262.jhtml

Hi Scott, when you programed the new key did you have to reprogram the keys still working? On the NP300 manual and Maxiap200 scanner manual it appears that when you add a new key fob you have to program all key fobs. Have a question about this in Autel tech support.

 

[Scott52]

Hi Scott, when you programed the new key did you have to reprogram the keys still working? On the NP300 manual and Maxiap200 scanner manual it appears that when you add a new key fob you have to program all key fobs. Have a question about this in Autel tech support.

Yes that's correct ... you reprogram all keys. Once you're in the programming mode you can have ten keys and program them all. It works well.

For information this is where I bought my replacement key. Locksmiths wanted about $200 for the same thing and Nissan was a lot more. I took my original and the replacement to a locksmith at the local shopping centre and had it cut. That didn't cost too much.

https://www.aliexpress.com/item/328....order_list.order_list_main.30.54461802eLPVRR

 

[Philip M]

Yes that's correct ... you reprogram all keys. Once you're in the programming mode you can have ten keys and program them all. It works well.

For information this is where I bought my replacement key. Locksmiths wanted about $200 for the same thing and Nissan was a lot more. I took my original and the replacement to a locksmith at the local shopping centre and had it cut. That didn't cost too much.

https://www.aliexpress.com/item/328....order_list.order_list_main.30.54461802eLPVRR

View attachment 38669

 

[Philip M]

Thanks Scott, been awhile but do you remember the procedure? Get the “confirm fob ID” first then ?.?
See attached menu from Maxiap200. Any advise greatly appreciated.