D22 waterpump shot

Nissan Navara Forum

Help Support Nissan Navara Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

HIGHWAY89

Member
Joined
Jan 14, 2025
Messages
4
Reaction score
1
Location
Heathridge
My d22 cr 2.5
of 09 has done the waterpump at 280k replaced the injectors and employed a double row timing chain at 160k so she's still good otherwise, besides oil leaks front drivers side of engine , any ideas or tips on a good mechanic/ shop in perth to do the waterpump and hopefully fix oil leaks.
 
I can't be sure, but I thought I'd seen another post similar to this recently.

The water pump isn't a huge job, you need to remove the fan, then the viscous hub, then the fan belt and the pump. It should be do-able with the engine in the bay.

I don't know of any specific mechanic over that side of the Nullabor who could do the job.
 
Hi ,can't get the remaining nuts off studs that hold the warer pump on my 1206 model Nissan Navarra D22, 4 cyl , diesel because the pully wheel on the pump shaft in in the way and cant get a 12 mm spanner or socket on straight to get enough perchase to undo them as the spanner only has limited movement and seeing that you can't get a straight go at it and 12 mm box spanner jumps the hex nut same with the socket and frightened i will round the nut head if i persist to try to crack the thread when i try to undo them any advise would be appreached Edgar , willing to pay for advice if you have any .
 
Last edited:

Latest posts

Back
Top