4wd suspension

[180degrees]

Yes that is the new proposed law. but it is not set in concrete yet.
So at the moment we can still have a bodylift approved with a K3 mod plate.

My mod plate guy is in discussion with the head guy from Queensland transport & even he agrees that a lane change test is silly.

So basically you can get a bodylift approved
Cheers

ok Sweet thanks for that insider info

 

[grasshopper]

Zordo,
Your website email page appears to not be working since last Wednesday i think i sent the first enquiry...

Re-sent via PM today.
Cheers

 

[Ajc]

Hey zordo.
I am after aome advice. I currently have an ironman 2" lift. But noticed sag in the front even with the spacers.
I am about to fit an arb deluxe bar and a winch 12,000 ,would it be ideal to run a constant load spring? I was thinking about putting lovells coils in the front.
Also is it possible to put bigger shocks in the front for more travel???
Thanks.

 

[ZORDO]

Hey zordo.
I am after aome advice. I currently have an ironman 2" lift. But noticed sag in the front even with the spacers.
I am about to fit an arb deluxe bar and a winch 12,000 ,would it be ideal to run a constant load spring? I was thinking about putting lovells coils in the front.
Also is it possible to put bigger shocks in the front for more travel???
Thanks.

Hi mate.
Yes a constant load coil with Bullbar & winch
With a Bullbar i normally use Lovells front shocks & H/D Dobinson coils.
he Lovells shocks are as long as you can get without new upper arms
Cheers

 

[Josh2013]

how much for a body lift fitted to my d40 navara 05 spain model? also how much for it to be mod plated?

 

[ZORDO]

how much for a body lift fitted to my d40 navara 05 spain model? also how much for it to be mod plated?

Hi mate.
50mm bodylift supplied & fitted is $900
Mod plate is done at Morayfield for $150
Cheers

 

[Josh2013]

Hi mate.
50mm bodylift supplied & fitted is $900
Mod plate is done at Morayfield for $150
Cheers

have u got any pictures of a d40 with just a 2inch body lift?
also where about u at ill be looking at getting it done it the next 3 weeks if not earlier
Cheers Josh

 

[ZORDO]

have u got any pictures of a d40 with just a 2inch body lift?
also where about u at ill be looking at getting it done it the next 3 weeks if not earlier
Cheers Josh

Sorry mate, no pictures.
Jack you car up 50mm & that what it will look like.
I am at Upper Kedron
Earliest i can do is 24th, 26th or any time after that
Cheers

 

[bgorm6]

Hey mate how much for an efs 2'' lift kit including torsions installed on a d22

 

[ZORDO]

Hey mate how much for an efs 2'' lift kit including torsions installed on a d22

Hi mate.
Can supply & fit a EFS kit for $1650
Cheers

 

[wattysan]

Hi mate.
I pick the best bits from a few brands
Bluemax or EFS leaves Dobinson coils Lovells shocks.
I have use this kit numerous times with good success
Cheers

Zordo installed this system on my D40 last week. Good system, good service and advice. Thanks a lot John, keep up the good work.

 

[cusackJames]

how you going zordo mate?
im chasing a body lift for a 2005 d22 navara supply and install
but I am located in perth
can you plz help me out don't mind paying bitta extra stoosh to get it done
cheers let me know !!

 

[ZORDO]

Hi mate.
I can supply a Bodylift kit for $405 posted to Perth.
Not that hard to do yourself as the kit comes with instructions & i give phone support.
Otherwise Dilmah might do the fitting for you.
Cheers

 

[Kochie]

Hi zordo
I'm after a 2" suspension lift kit for my 2010 d40 stx. Been pretty keen on tough dog with the 40mm foam cell shocks. Have a winch bar so need the heavy duty front coils. How much would you supply a kit for? Or would you recommend a better brand?
Also postage to SA
Cheers

 

[ZORDO]

Hi zordo
I'm after a 2" suspension lift kit for my 2010 d40 stx. Been pretty keen on tough dog with the 40mm foam cell shocks. Have a winch bar so need the heavy duty front coils. How much would you supply a kit for? Or would you recommend a better brand?
Also postage to SA
Cheers

hi mate.
I can do a Toughdog kit for $1790 shipped.
But to tell you the truth i have had quite a few people come to me with saggy front ends with toughdog suspension.

I can ship my custom kit for $1525 depending on where you are in SA
Cheers

 

[Kochie]

hi mate.
I can do a Toughdog kit for $1790 shipped.
But to tell you the truth i have had quite a few people come to me with saggy front ends with toughdog suspension.

I can ship my custom kit for $1525 depending on where you are in SA
Cheers

Ok cool. What does your custom kit come with? Brands, shock types, etc
Cheers

 

[nav224]

hey zordo what shocks would you recommend for my d22, I have all stock suspension but want to slowly buy parts for a 2 inch lift?

 

[Insanenavara]

Hey zordo where in Brisbane is your shop?

 

[ZORDO]

Ok cool. What does your custom kit come with? Brands, shock types, etc
Cheers

Bluemax leaves. Dobinson coils, Lovells shocks.
Bushes, shackles, u/bolts included
Cheers

 

[ZORDO]

hey zordo what shocks would you recommend for my d22, I have all stock suspension but want to slowly buy parts for a 2 inch lift?

Hi mate.
i normally use EFS or Bluemax shocks
If you want a preminum shocks the Bilsteins
Cheers