stock suspension / height - bigger tyres

[lancermr]

Hi All,

looking for pics of people running bigger tyres on stock suspension on D22 STR?

Anyone out there? or is everyone running lift kits?

I need new rims/tyres soon and need to find out what the biggest size rims/tyres I can get on the car without having to get a lift kit. (lift kit will come later down the track)

Thanks for posting!

 

[bods]

265/75s are about the biggest you will squeeze in without a lift. It also depends on the tyre too, but I have that size on the stock rims and did so before I put a suspension lift in the rear. I have had the torsion bars wound up for around 4 years now and haven't had them sag again. Only rubbing I get is on the inside of the front mud flap which I still need to trim...

 

[G-Dubya]

Same here. I've got 265/75's on stock suspension. I haven't wound up torsion bars and have had no issues with rubbing or scrubbing in the guards.

 

[lancermr]

thanks for the help!

Do any of you have a picture?

 

[bods]

Yep. Didn't take any before lifting the rear, but the front is wound up to about 10-12mm from the upper bump stop.



And front mudflap clearance after trimming

Hope that helps a bit

 

[lancermr]

thanks so much! that does help!
and it looks good!

If I were to fit 33 inch tyres.
what do I need?
2 inch body lift?
2 inch suspension lift?
both?

and roughly how much do they cost?

 

[Jased22]

Think you would need a body lift and suspension lift to fit 33's. Here's a pic of 32's touching the rear guard and iv had them hitting the plastic end cap on my side step when full flexed with 3inch lift

 

[bods]

Yep 2 inch suspension and 2 inch body lift minimum to fit 33's. Prices vary a lot depending if you fit it yourself or get someone else to fit it. Your best bet would be to send zordo on this forum a pm and he will sort you out

 

[lancermr]

Think you would need a body lift and suspension lift to fit 33's. Here's a pic of 32's touching the rear guard and iv had them hitting the plastic end cap on my side step when full flexed with 3inch lift

Thanks! do you have a full side picture of the car?
also is that 32's with standard suspension?

 

[lancermr]

Yep 2 inch suspension and 2 inch body lift minimum to fit 33's. Prices vary a lot depending if you fit it yourself or get someone else to fit it. Your best bet would be to send zordo on this forum a pm and he will sort you out

sounds like its gonna set me back a few dollars.
ill try to find zordo and PM him.

 

[bods]

sounds like its gonna set me back a few dollars.
ill try to find zordo and PM him.

Probably will do lol. Have a look in this thread.

http://www.navara.asia/showthread.php?t=812

 

[lancermr]

Probably will do lol. Have a look in this thread.

http://www.navara.asia/showthread.php?t=812

LOVING THE NAVARA COMMUNITY ALREADY.

thanks heaps for the help!
ill message zordo tonight.

 

[lancermr]

im think of running 33 inch muddies with 2 inch lift.
no body lift.

has anyone else done this with minor rubbing or ?

 

[bods]

Have a squiz through this thread

http://www.navara.asia/showthread.php?t=7004

 

[loco12]

i run 33's (285 75 16) on 16x8 pos 20 rims, 75mm suspension lift, 30mm body lift and have chopped the inner guards right back. i can still make it rub both front and rear when pushed offroad. so with just a 50mm lift i would expect a fair bit or rubbing.

 

[bekka22]

I've fitted 31 inch maxxis trepadors and still rubbed fairly wickedly, had to bash out the mud guards