• If you have bought, sold or gained information from our Classifieds, please donate to Navara Forum and give back.

    You can become a Supporting Member or just click here to donate.

SLIDERS AND BARS (who is interested)

Nissan Navara Forum

Help Support Nissan Navara Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
OK guys we seem to have a lot of interest in the bars and sliders, so how about putting some orders in. We should have d40 bash plates done in the next week or so. engine and transfer case bash plates. D22 to come shortly.
 
OK guys we seem to have a lot of interest in the bars and sliders, so how about putting some orders in. We should have d40 bash plates done in the next week or so. engine and transfer case bash plates. D22 to come shortly.

Just a matter of getting the coin together without the missus cracking the *****, were trying to get our first house at the moment.

Bash plates have got me hooked too
 
4X4 products or just plain porn!

G, day mate,

I have to congratulate you on the marvellous 4x4 product range that you are producing. However, looking though the various comments on the posts on this thread, I am somewhat concerned, that’s demonstrated by the following comments listed;

“Hurry up and let us bar you up. Can you post some pics of your rear, What you see is what you get, Yeah would love to see the rear, he is pretty excited about doing this, once he gets his mind into something NOTHING will stop him, I'm ready for one, Thanks Woody why not, I’m getting pumped, Ok we are so much closer now guys, I have a size 12, Ha-ha yeah I know scotty, The jig is made and ready, I'm sure you will be very pleased, Oh and by the way, he's got fairly tight tolerances, Scotty might just take a bit of thought to find a one measurement fits all, Scotty they look sexy. What size it is. You and Trave have done well.

They don’t need to be touched or wear a hole through them looking forward to seeing the rear from rubbing. That’s Trave backing his arse up, just using his arse as a set of vernier calliper’s, interested to see the angle, I know what you mean Jon and that is why I have done this mate. Once we have done these we will start on the rear, Only way round it is for the 2" raise, support someone getting of their arse and having a crack, C U at mid-day Scotty, they are there to protect you from getting T-Boned hard, Had the privilege of going up to visit Scotty and his mate Travis, and the bars came up really professional looking (would not expect anything less from Scotty).

Also got to talking to them about modifying my rear, it’s dangerous going to visit Scotty, was wanting to know if you could do my rear up like bosshog, and going to be one very busy boy! I don’t mind if you want to use me as a ginea pig, I think you get the picture. I was a dumb ass and got a Haymen Reese instead of a combination, Go fella. **** that looks great ... now I want mine re-done, we are looking at getting the rear done in the next few weeks; I haven't forgotten to send you measurements Scotty, just flat maggot with work. Pleasure doing business with you Scotty, We have pulled our finger out the last couple of days. I have so much going on in my life at the moment it’s not funny. WOW is all that is needed to be said.

Common Scotty stop the man whoring and get back in the shed, sorry guys I haven’t been on for a few days. I have been man whoring; now that’s defiantly a valid excuse..... Whore it up ya *******. Is that the sliders phone number or the manwhore booking number? Don’t get the 2 mixed up mate; Scotty might have to talk to you about a package deal! Hahaha, good stuff look forward to seeing the pictures, C'mon guys get your Xmas orders in. Treat yourselves to a present. Any rear bar work yet? Starting on a rear tomorrow night, Sick! That’s a nice rear Rusty, Scotty - what’s happening mate?

It sounds more like a sunk to the nuts 4x4 massage parlour enterprise staring both Krafty PG and young Dave the administrator! What the f—ks going on!

PS, I hope you enjoy the editing!

Regards,

RLI

:rambo::deadhorse::wristy:
 
i was gunna drive down to scottys to get my bar fitted, stay a day or 2
now ime not so sure
:confused2:
its a long way to go to get my rear end sorted
 
I have been towing with my rear bar for the last 1000kms and can not fault it. The guys at the Nissan dealer where impressed when it went in for it's 1000km service too.

I have also jacked the car up at the corners to test it and it doesn't budge.

Thanks Scotty, great product, does what it's designed to and provides better departure angle. Best of all it's Aussie made, what more could you ask for.

I will get some more pics of mine soon, I have the trailer plug and number plate mounted but haven't got around to putting a number plate light on it yet.

Get your orders in people and support a great Aussie made product. I am so glad I didn't get an ARB/TJM piece of crap.
 
nismo4x4 said:
Hi im planning on miggin me up some sliders...are we/should be allowed to drill into the chassis?

No. Drilling the chassis will weaken it, and may make it unroadworthy. I'd be following the norm and making a steel "U" bracket that clamps under the chassis rail.
 
judging by the feedback - clearly scotty does a good job and builds a nice product - but but seriously WTF?

I have been towing with my rear bar for the last 1000kms and can not fault it.

it's a towbar! and it eithor does it's job or it's useless and if I bought a towbar I'd expect it to outlive my 4wd.
 
judging by the feedback - clearly scotty does a good job and builds a nice product - but but seriously WTF?



it's a towbar! and it eithor does it's job or it's useless and if I bought a towbar I'd expect it to outlive my 4wd.

G,day mate!

He does more than a good job, if you can stand the pain both he and Trave can stand the strain!

PS, you are getting more than a towbar.

Regards,

RLI

:rambo::deadhorse::wristy:
 
judging by the feedback - clearly scotty does a good job and builds a nice product - but but seriously WTF?



it's a towbar! and it eithor does it's job or it's useless and if I bought a towbar I'd expect it to outlive my 4wd.

It's not just a towbar but I haven't been using it for it's other intended uses apart from to use it as a jacking point once.

Fortunately it hasn't been used for body protection..... (yet)
 
judging by the feedback - clearly scotty does a good job and builds a nice product - but but seriously WTF?



it's a towbar! and it eithor does it's job or it's useless and if I bought a towbar I'd expect it to outlive my 4wd.

oils aint oils
soul
 
Hey Scotty

Is there a price for a Thai build D22 rear bar without the towbar but with the swing away jerry can and rear wheel holder?

If so can you PM me?

Cheers
 

Latest posts

Back
Top