Radflo coil overs
- Thread starter Zakka
- Start date
Help Support Nissan Navara Forum:
Aussie Frontier
Member
I have had the Radlos in for the last few years. Greg at PRG is a wealth of info on the shocks. If Not you can ring Glenn at Radlflo if you have any questions
This is my setup fully engineered and 100% legally registered
This is my setup fully engineered and 100% legally registered
LLadnar
Member
I don't have a set but, I'm getting a set as soon as I've got the cash. There is a company in Melbourne that sell them, KPD industries and their prices are pretty good compared to the USA.
Aussie Frontier
Member
Just make sure when you order them you order the right spring strength.
For a 4x4 with bullbar etc you would need something like a 750lb spring.But the less weight over the front axle the softer the spring
I have the 4x2 with alloy bar and I am running 500lb springs.750lb springs were way to strong for mine .Before you order your gear speak to Glenn at Radflo or Greg at PRG so you get the right springs .
For a 4x4 with bullbar etc you would need something like a 750lb spring.But the less weight over the front axle the softer the spring
I have the 4x2 with alloy bar and I am running 500lb springs.750lb springs were way to strong for mine .Before you order your gear speak to Glenn at Radflo or Greg at PRG so you get the right springs .
LLadnar
Member
Yeah I told them everything I've got fitted and their weights and they said I needed the 650lb springs. But now have to add the weight of the V6 engine.
Thanks for the info guys, I have decided to guy with PRG due to there experience and reputation with setting these shocks up,aswell as saving a coupla hunge.I already have the SPC Uca's so I'll see how they run with them. I'll be running superpro alignment bushs aswell, so I'll have plenty of adjustment for alignment.cheers.
Aussie Frontier
Member
Tell Greg I said Hi and its my shout for lunch next time Im there lol
