Load Sensing Valve

[Aussie Frontier]

Has anyone lifted the load sensing valve when lifting the rear?
only going max of 50mm but just curious if anyone has moved the valve.

 

[Leprechaun]

I adjusted mine as to the diagram/sticker on the inside of the passenger door.

 

[Aussie Frontier]

Shows how observant I am lol
I never looked at that sticker lol
So you didnt raise the lower spring mount just made the adjustment kool

this is what im on about
http://72.34.32.141/~snakerac/product_info.php?cPath=3_106_273&products_id=2336&osCsid=dc26264243e0ff0c8eb560b82b64fa41

 

[Leprechaun]

I just made the adjustment. Seems OK and never really thought about it since doing the lift. The brakes easily out perform the mud tyres, with my stiff setup.

 

[Aussie Frontier]

Fair enough

 

[jarryd]

bring up and old thread here , but with my recent 2inch lift plus new muddies i feel as if i have no brakes i looked under neath and saw the allan key screw is that what u adjust if so do u tighten it or loosen it ?

 

[Aussie Frontier]

I loosened the 2 nuts that holds the bracket till I got the distances according to the placard thing on the left front pillar

 

[jarryd]

my st doesnt have a card on the pillar ?

 

[jarryd]

would i move that bracket forwards or backwards lol ?