LED LIGHT BAR - Wiring

[anubiskau]

Hey guys, I have wiring in the engine bay I need to get to a switch beside the Heater button on the RHS of the steering column. Im trying to figure out a way to get it in there, I have tried coming through the rubber grommet between the door and the vehicle but to no avail..

any ideas?

 

[KraftyPg]

Can't you just come in the firewall in the same place others have and route the wire to the RH side of the column?

 

[anubiskau]

Would love to but the only place I can find is right behind the Master Cyclinder..
any suggestions or diagram where I can run this wire?

 

[KraftyPg]

The topic of routing wires through the firewall comes up often so surely a search for something like "through firewall" or maybe even "cable routing" or something like that will show you where others have run theirs.

 

[charlie strayarc]

There is a bung near master cylinder,pop it out,drill a hole thru middle of it the size you want and whack it back in. Dave posted a photo of it ages ago,couldn't tell you which thread it was in

 

[KraftyPg]

If Dave posted it it's probably in his own build thread as he consolidated all his pics not long back.

 

[sparra04]

If Dave posted it it's probably in his own build thread as he consolidated all his pics not long back.

thats not all he consolidated

 

[KraftyPg]

There is a bit in the middle where all his pics are shown one after the other, even our dribble doesn't get caught up in that section.