Jason's Silver Bullet

[Jason]

Well the rear bar I got says D22 Navara 2008+

So maybe worth a call to TJM?

 

[Gonzo]

Looks awsome Jason ! Me thinks me get one very shortly

 

[Jason]

Tigerz11 12000LB Winch installed! Took about 4 hours all up.

Bullbar removed

TJM Winch Cradle installed

 

[Jason]

Winch in location

Bullbar back in place, control box location

 

[Jason]

Back together

 

[Jason]

And took a couple of pics of my dual battery setup with the Pirhana tray and Exide ED5 battery.

 

[robmacca]

Jason....

How much clearance would there be on the Passengers side between your radiator and the winch? the vehicle I've just purchased has a Intercooler in front of the radiator on the clear space side on the passengers side of the radiator so I'm curious as to whether I can install a winch w/o having to change/modify the Intercooler..... (Intercooler is a Northside4X4 one)

Plus, I gather u draw power for your winch from the main battery ?

rob

Tigerz11 12000LB Winch installed! Took about 4 hours all up.

Bullbar removed

TJM Winch Cradle installed

 

[Jason]

Hi Rob,

There is about 115mm gap between the front of the radiator and the back of the winch, the winch only covers the bottom 140mm of the radiator, the rest above is clear.

I have wired the winch direct to the main SLI battery, I have setup the manual overide on my Redarc so I can manually switch the deep cycle battery into parallel if I ever needed it.

 

[chule]

Great looking rig mate.

 

[Jason]

Looks awsome Jason ! Me thinks me get one very shortly

Great looking rig mate.

Thanks guys.

 

[robmacca]

Thanks for that..... I get the car on Wednesday, so I'll have to measure it but it might be close by the sounds of it as the IC is mounted vertically and I think is quite long......

Your winch is a 12,000lb one, are the smaller ones (ie 9000 or 10000lbs) the same physical size or are they slightly smaller?

Hi Rob,

There is about 115mm gap between the front of the radiator and the back of the winch, the winch only covers the bottom 140mm of the radiator, the rest above is clear.

I have wired the winch direct to the main SLI battery, I have setup the manual overide on my Redarc so I can manually switch the deep cycle battery into parallel if I ever needed it.

 

[Jason]

Not sure mate, check the Tigerz11 website, they have dimensions.

 

[equipt]

DO NOT BUY the 10,000lb Tigrez 11. It is a dual speed winch and is allot bigger than the 12000lb.

 

[Matt76]

Looks bloody fantastic mate!

 

[Cooper]

Jase whats your battery specs? Deepcycle and AH?

Great looking winch man, but it needs to get dirty!

 

[Jason]

Hey mate, its the Exide ED5, deepcycle and 85ah from memory.

 

[FatBoy89]

Any chance you have any photos of the back of your BB?

 

[Jason]

If you mean before it was put on, no I don't sorry.

If there is something specific that you need a pic of let me know and I can try while it is on.

 

[FatBoy89]

Just curious how the bullbar mount at arches the the bullbar itself
Cheers

 

[Jason]

Well the truck has been in the panel beaters for a couple of days after an old lady tried to squeeze past me to get into a right turn lane. Should get it back on Monday. I ended up with a rub mark on the rear bar and a cracked tail light where her mirror clipped it, she needs a new side for her car. The panel beaters are also cleaning up a couple of small dings I had in the rear from before the rear bar went on.

My damage:

Her damage: