D40 Front sagging under weight

[Neilsk]

Morning,
i have a 2012 D40 ST Navara. I had a 2 inch lift put in it 1-2 months ago. i was through TJM and it was a EFS suspension.

it looks like with the weight of the steel bullbar and the underbody guards, the car is on an angle. is there any legal way to adjust this without spending too much. it would only need to be 1-2 cm to sort of make it a little more level.

 

[nathand22]

I would be talking to TJM for an explanation as to why they have put in springs that are NOT coping with the bar and plates, in all reality new suspension will settle a little with in the first 1000km but if the CORRECT spring is fitted this sagging should be MINIMAL.
Did you have the bar and plates when you had the suspension fitted?
or wereTJM aware that you would end up with that gear?
If they were then they should be willing to help IMO.

 

[siringo]

Get these ...

http://www.superiorengineering.com.au/product_info.php?cPath=31_52_356&products_id=9363

 

[Neilsk]

Yeah the bullbar was there when they fitted it, they installed the bashplates and the lift at the same time.

i will send them an email. cheers