BrisVegasBretto
Member
- Joined
- Nov 23, 2010
- Messages
- 1
- Reaction score
- 0
Hi all,
I’ve recently purchased myself a new D22 Navara. Never owning a 4WD before I was looking for something new, but entry level, affordable, yet considered reliable. Given that I’ve somewhat rushed into the purchase and still a little bit under prepared I have some beginners questions I was hoping someone could help with.
Diesel Engine Run-in
I’ve read a number of online articles on how to properly run in a new diesel engine. Seeing as how most of the articles are about 8 – 10 years old I’m wondering if they are still relevant?
At any rate what is the best way to run in a new D22 Navara Engine?
So far I’ve just been driving it the way I would any new car. Not over revving, but at the same time not babying the car. Steering clear of any road which demands constant speed and revs over long distances. I’ve only had the car 4 days. Currently it’s getting me to and from work. Fortunately I’ve managed to dodge peak hour traffic avoiding excessive stays at lights with the engine idling.
The D22 manual suggests I should stick with this routine for around 1,600kms, however people I work with have suggested distances around the 3,000 – 5,000km mark.
Some other questions:
How prevalent is engine cylinder glazing in modern diesels?
How long should I run-in the engine?
How long till I’m able to take it off road (general beach driving)
Any help is appreciated. Cars/Trucks etc… aren’t exactly my strong point.
I’ve recently purchased myself a new D22 Navara. Never owning a 4WD before I was looking for something new, but entry level, affordable, yet considered reliable. Given that I’ve somewhat rushed into the purchase and still a little bit under prepared I have some beginners questions I was hoping someone could help with.
Diesel Engine Run-in
I’ve read a number of online articles on how to properly run in a new diesel engine. Seeing as how most of the articles are about 8 – 10 years old I’m wondering if they are still relevant?
At any rate what is the best way to run in a new D22 Navara Engine?
So far I’ve just been driving it the way I would any new car. Not over revving, but at the same time not babying the car. Steering clear of any road which demands constant speed and revs over long distances. I’ve only had the car 4 days. Currently it’s getting me to and from work. Fortunately I’ve managed to dodge peak hour traffic avoiding excessive stays at lights with the engine idling.
The D22 manual suggests I should stick with this routine for around 1,600kms, however people I work with have suggested distances around the 3,000 – 5,000km mark.
Some other questions:
How prevalent is engine cylinder glazing in modern diesels?
How long should I run-in the engine?
How long till I’m able to take it off road (general beach driving)
Any help is appreciated. Cars/Trucks etc… aren’t exactly my strong point.