33s and xrox bar (PICS)

[jms86]

Here are some pics of the 33s on my D40, after weeks of problems with getting them to fit i finally got them turning. If you have issues yourself or any questions, ask away!

INFO-
- 2 inch OME suspension + 2 inch body lift
- 18 x 8.5 Advanti Rims
- 275/70/R18 Mickey Thompson 4-rib

FRONT ON VIEW - XROX BAR WITH LIGHTFORCE 210 HID GENISIS SPOTTIES

SIDE VIEW - 45MM FLARES

WHEEL ARCH - BENT AND HEATED BACK OF FRONT WHEEL WELL

 

[cyc10n]

Looks pretty good mate I'm thinking of getting an xrox bar for many D22

 

[trevor1985]

looks tuff as mate good work.... how much lift did u get out of just the suspension because im doing mine soon and thinking of going ome maybe?

 

[jms86]

looks tuff as mate good work.... how much lift did u get out of just the suspension because im doing mine soon and thinking of going ome maybe?

cheers mate, i got 50mm lift out of the OME suspension, there a little bit more expensive but ive never had a issue with it (touch wood)

 

[joshdures]

What do mean by heat and bent flares

 

[jms86]

What do mean by heat and bent flares

I had to bend up the shaded area shown in the pic, that was the point in which the tyre was hitting. So i bent that up 90 degrees then re-installed the black plastic guard, put some heat on it to push it back to get the most clearance i could, then tech screwed through the plastic into piece i just bent to hold it secure. Worked a treat as you can see from the last pic. Even tried it offroad and no rubbing so far. Hope that answered your question mate.

 

[ryandm]

car looks awesome!! what year model is your ute i want those headlights but i have a dual cab st 2010 model and they said they dont make it for dual cabs after 2010.

 

[jms86]

car looks awesome!! what year model is your ute i want those headlights but i have a dual cab st 2010 model and they said they dont make it for dual cabs after 2010.

cheers mate, well there full of shit cause thats a 2010 dual cab ST!!!

 

[justAL]

Good work!

 

[jms86]

Good work!

cheers mate!! i really need to stop spending money on her but i cant

 

[oddkid82]

I know the feeling. You think you've stopped then you find something else, there is no end.

 

[s.weapon]

Looks wicked mate, well done. what offset are the wheels?

Just about to go a very similar path, but was thinking 9" wide rims and 33 x 12.5 kuhmo muddies, with a similar 4" lift.

If u had to get more clearance with the heat gun is there space? Or have u made as much as possible...?

Cheers

 

[jms86]

Looks wicked mate, well done. what offset are the wheels?

Just about to go a very similar path, but was thinking 9" wide rims and 33 x 12.5 kuhmo muddies, with a similar 4" lift.

If u had to get more clearance with the heat gun is there space? Or have u made as much as possible...?

Cheers

cheers weapon, the rims are a +34 offset which brought them outside the guard hence the 45mm rubber flares. Plenty room to reheat, worse case scenario you could bend the fenderwell further then re tech screw the rubber guard back onto the bent up piece of well. At the moment i have about 25mm when turning minimum clearance, ive taken her offroad and she doesnt rub at all

 

[s.weapon]

cheers man vital info!!

so if i was to go -12 offset wheels im gonna need 4.5cm further clearance, you have 2.5, so need to atleast double that with the inner guard mods.

and then 90mm wheel arch extentions are gonna be real close to the edge of those tyres.. maybe going back to 0 offset will life a little easier..

just wanted to have the thing sitting fat and wide!!! haha

 

[Connaught]

what you figure the chances are of fittin that without the body lift?

thanks
Conn

 

[jms86]

what you figure the chances are of fittin that without the body lift?

thanks
Conn

i had the wheels before the body lift, the only chance to get them to fit would be cut the guard and re-roll.

 

[Connaught]

damn,

was it a huge interference, or would going to a 32" tire sort it out?

 

[jms86]

Yeah mate couldn't even turn a half turn, it's an easy fix tho just need to research and be confident before you start bending things

 

[NavMatt]

Nice Work looks Good,
Am getting Mickey T ATZ 4-Rib 33's put on the STD Nissan ST rims today I have a 2" Suspension and 2" Body Lift on my 2010 ST as well as the Xrox Bar.

Even my 32's Rubbed on full lock and a little compression will eventually look at neg Offset 8" rims

 

[jms86]

Nice Work looks Good,
Am getting Mickey T ATZ 4-Rib 33's put on the STD Nissan ST rims today I have a 2" Suspension and 2" Body Lift on my 2010 ST as well as the Xrox Bar.

Even my 32's Rubbed on full lock and a little compression will eventually look at neg Offset 8" rims

cheers matt,

have you looked at bending up the rear of the front fenderwells, check page 1 i have a few pics of what i did, opens the back up real nicely