Transfer case

josh1234 · Sep 10, 2024

Hi all,
Just took the transmission out of my dx d22 2000 model with the qd32 in it. When I did so we were having some trouble removing of the rear of the engine and when It finally budged, it slipped of our straps and hit the floor. No damage occurred to the internals however two circlips that a 3/4 the shape of a circle fell out of the rear of this transmission. I tried finding the placement of these two circlips in the workshop manual but cannot. Was wondering if anyone can help me out?
Cheers

tweak'e · Sep 11, 2024

did you have the transfer box still on the gearbox?
can you post pic and what size they are.
if they are small i would suspect shift mechanism or even uni joints.

josh1234 · Sep 11, 2024

tweak'e said:
did you have the transfer box still on the gearbox?
can you post pic and what size they are.
if they are small i would suspect shift mechanism or even uni joints.

Hi tweak'e
The images of the two suspected circlips are attached aswell as the dust cover placement and output shaft and other items I thought would be important important and no, I have not separated the transfer case from the gear box, it is still one. Apologies for not sizing them against the ruler, they are about 3-4 cm in diameter.

dreadedzd30d22 · Sep 12, 2024

Excuse me if I'm wrong but they look like the torsion bar clips? Just done the clutch in my d22 and those look the same

josh1234 · Sep 12, 2024

dreadedzd30d22 said:
Excuse me if I'm wrong but they look like the torsion bar clips? Just done the clutch in my d22 and those look the same

Oh ok, I mean it is a hight possibility that it is them because we did take the torsion bars out, do u know where abouts they go?

dreadedzd30d22 · Sep 12, 2024

josh1234 said:
Oh ok, I mean it is a hight possibility that it is them because we did take the torsion bars out, do u know where abouts they go?

where the torsionbars/ adjustment bolts go into the brace that holds them there is some grooves one groove sits in brace other Groove is for circlips. They kinda just sit in space lol. One for each torsion bar. Yeah it's a bugger removing torsion to remove gearbox aye. I thank this forum for giving me that nugget of knowledge lol

josh1234 · Sep 12, 2024

dreadedzd30d22 said:
where the torsionbars/ adjustment bolts go into the brace that holds them there is some grooves one groove sits in brace other Groove is for circlips. They kinda just sit in space lol. One for each torsion bar. Yeah it's a bugger removing torsion to remove gearbox aye. I thank this forum for giving me that nugget of knowledge lol

Thanks, yeah me too this forum is quite handy for the nissan I have. I will see if they are from them and thank you very much.

dreadedzd30d22 · Sep 12, 2024

Cool look forward to hearing results. I will be taking my box out again. Put new clutch in just to blow box up haha. Forum is gold, should consider donating to it if it's helping ya get the work done haha

Transfer case

Help Support Nissan Navara Forum:

josh1234

Member

tweak'e

Moderator

josh1234

Member

Attachments

dreadedzd30d22

NF Supporter

josh1234

Member

dreadedzd30d22

NF Supporter

josh1234

Member

dreadedzd30d22

NF Supporter

Similar threads

Latest posts

Transfer case

Help Support Nissan Navara Forum:

Member

Moderator

Member

Attachments

NF Supporter

Member

NF Supporter

Member

NF Supporter

Similar threads

Join the conversation!

Join today and get all the highlights of this community direct to your inbox. It's FREE!