cnc.cpt
Member
My navara stopped running. Used to struggle with cold start. Head gasket and rings were redone thinking that is the problem because they were finished. Now I still have the same problem after doing the motor over.
Big problem is the motor turns over slow even with help after a bit and a brand new starter. The starter gets extremely hot and the jumper cables get extremely hot. There is about a 5 to 7 volt drop at battery when cranking.
Sounds like it wants to start then it starts cranking slow like not enough power as I say even with a running diesel vehicle jumping me.
Big problem is the motor turns over slow even with help after a bit and a brand new starter. The starter gets extremely hot and the jumper cables get extremely hot. There is about a 5 to 7 volt drop at battery when cranking.
Sounds like it wants to start then it starts cranking slow like not enough power as I say even with a running diesel vehicle jumping me.
