Tub lights.

[Aidos]

Hello again everyone,

Just wondering what the best way to wire up led lights or led strips in the tub.

Need help to see in the dark. ps how hard is the job!

 

[TigerST]

Hard is how hard you make it....

A few strip lights wired to a 12volt source in the tub a piss easy. Strip light wired to a switch in the cab not so easy

 

[Aidos]

Not to bright with all this.. haha. Still need to put dual batteries in so what would be the best products to use?

 

[TigerST]

Again Depends on what your after........ I'll show you my set up

I dont have a duel battery set up yet.



Plug and Play to a 12volt power pack with cig lighter........ Works well and took no time to do.



This is the out put out of one light. You can work with it but noway in hell can face and get things out of the tub. But I love them none the less. One day will get them wired to a switch in the cab.

 

[TigerST]

other wise something like this strung around the inside of tub might work.

http://www.ebay.com.au/itm/12V-Cool...hting_Fans&hash=item4d0e79729b#ht_5742wt_1104

 

[Rob titan]

Strip lighting is the way to go. I ran it around the tub left and right side and under back window then to the cig lighter in car. I only use it when out fishing so it does the job...

 

[Busiboy]

An auto electrician if you want dual batteries as well.

 

[pdiddy]

Personally I would get the second battery installed first. If it goes in the tub, wiring lights becomes so much easier as a switch panel can be run straight off it

 

[Aidos]

Another question best way to get into the cab through the fire wall? Just had a lookzie couldnt find any holes. (Always the problem..)''

Also the best place to screw down the isolator?

 

[Cobez]

Big rubber grommet drivers side floor.

 

[Aidos]

Big rubber grommet drivers side floor.

is that under the carpet or the door trim?

 

[TigerST]

is that under the carpet or the door trim?

Behind the steering wheel.