Through Firewall wiring ?

[jonney]

Guys, where is an easy spot to run my switch wiring harness through the firewall ? i can,t see any gromets to remove for easy access. [ d-22 str ]

 

[rastik86]

Don't remove any grommets ever. Not even if there's a fire. Stick a hole in em with a screwdriver and stick the wires through the hole you made.

There are a couple up above the accelerator somewhere and there's a big one on the passenger side up under the dash in the footwell.

 

[Bad Juju]

The current D22 has none.
I made one, down and to the left of the brake booster.

 

[Navmania]

There is a black plate near the back of the inlet manifold off to the side of the brake booster. Has two bolts. I removed that and drilled three holes in it than fitted water tight glands that you can buy from jaycar. I would have around 20 wires passing through there with room for more. Depending on the size of the wire of corse.
Cheers.

 

[Bad Juju]

Just checked my 2014 again ... nope nothing.
I think I even had a chicks look ....

 

[jonney]

yes i saw that black plate with 2 bolts just behind the side of engine, i will remove and drill a hole and fit a suitable rubber grommet for safe insulation etc. thanks guys for your help.