Sports bar cabling !

[George k]

Hey guys going to be installing some work lights on the sports bar and wondering how do I get my cable threw the bottom of the sports bar , can't see where the bar opening is ???

Cheers George

 

[4x4 ST-R]

I just drilled a hole in the plasticky rubber piece, then with some wire and my tongue in the right position I managed to feed to wire through. Then drilled a hole in the lip of the tub to feed the wires through again, and then another hole in the floor of the tub to get the wires down there and under then through the cab.

 

[George k]

Lol I don't get what your saying at all !!!!!!

 

[4x4 ST-R]

Haha. Oh. Remove the sports bar from your tub. Fit your lights and feed your wire through from the top of the bar. Next to the sport bar mounting bolt, drill a suitable size hole for the wire to come out. Then run your wire where you want, drilling new holes if need be.

 

[George k]

Oh k nw I get u ! And nw let me ask a stupid qs what's the best way to take the sports bar off as i have never done that !

 

[4BYFOR]

Sledge hammer mate

 

[George k]

Haha ! Seriously !!!!

 

[4x4 ST-R]

Assuming yours is the same as mine, where the sports bar rests on the tub, look under the lip of the tub and u will see a bolt head at each point....undo the bolts. Then lift it off.

 

[George k]

Ok thanks alot for the pointers !!

Cheers