Outside Temp Display

[Malicious]

Ok have been busy tonight, will have more ready to post by Friday just got to do testing on them, which takes longer than it does to make them

 

[Malicious]

More ready to go... Think people must wonder what the hell I'm doing driving round and round the block stopping and crouching at the front of my ute

 

[Malicious]

Hi all it seems they are being troublesome if you get yours and it doesn't work let me know and I'll send another if we still can't get them going I will refund the money, in theory they should work with only the one but may need to put one in the second set of pins for the ecu, I tested every one it sent out with 2 plugged in due to my ute having climate control

 

[Old.Tony]

Are they different to the ones I've tested? Mine work just fine.

 

[ndr4]

Hi all it seems they are being troublesome if you get yours and it doesn't work let me know and I'll send another if we still can't get them going I will refund the money, in theory they should work with only the one but may need to put one in the second set of pins for the ecu, I tested every one it sent out with 2 plugged in due to my ute having climate control

Hi Mate, i couldn't get mine to work either until i pulled the 8th fuse down on the left row in the glove box.
The clock had to be reset & trip meters went to zero.
The "C°" flashed for about 2mins then stopped.

 

[Malicious]

As soon as I get home on Thursday I'll send more out to everyone, scratching my head now , if not Thursday then next week, sorry for the delay, my partner got flown to Sydney urgently last week so had to get my butt down here too

 

[Malicious]

Hi Mate, i couldn't get mine to work either until i pulled the 8th fuse down on the left The "C°" flashed for about 2mins then stopped.

If you can leave it in and drive around for a while and see if it starts reading a negative number if it does let it do it's thing for a good while and it should stabilise

 

[ndr4]

If you can leave it in and drive around for a while and see if it starts reading a negative number if it does let it do it's thing for a good while and it should stabilise

Sorry mate, you miss interpreted me, the "C°" stopped flashing after awhile, so all is good with mine.

 

[Malicious]

Sorry mate, you miss interpreted me, the "C°" stopped flashing after awhile, so all is good with mine.

So it is working ?

 

[Malicious]

Appears that it is the 8th fuse, BAT 10A electronic parts that needs to be pulled, the joy of different dashes

 

[kevvyp]

Mine works a treat

 

[Malicious]

Awesome, the later dash in mine is a bit different so is hard to ensure that it would work on the earlier ones

 

[4BYFOR]

Ok so I pulled out all the electrical fuses and the meter one and I have display! It says 45c and c is flashing haven't had the chance to drive it as I'm at work but will see this arvo

 

[ndr4]

So it is working ?

Yes Mal, Mine is great!!

 

[Malicious]

Fantastic , 1 for us 0 for nissan spares

 

[ndr4]

Awesome, the later dash in mine is a bit different so is hard to ensure that it would work on the earlier ones

Mine is a 2006 STX, pulling the 8th fuse on the left bank worked for me!!

 

[Kranzy]

Mines a 2007 STX and the 8th fuse did the trick for me also.

Malicious I sent you a PM but its not showing in my sent items so let me know if you dont receive it.

 

[4BYFOR]

Mate I'm all good it works thanks! I will spread the word for you on Facebook too

 

[mike1303]

So am i reading this right, You lot have found a way to get the thai trucks to display the temp on the dash

 

[camo.b]

So am i reading this right, You lot have found a way to get the thai trucks to display the temp on the dash

Still working on the thai....