hey guys i've recently got a tunit chip for my zd30 and i'm installing it myself i've got everything joint together but the fuel pump, could someone please direct me to which cable i have to join to the fuel pump? i have searched this forum and other forums and i cant find the right cable to join. if anyone has photos or a video to where it goes to i would appreciate it heaps
fuel pump wires??
- Thread starter lem
- Start date
Help Support Nissan Navara Forum:
thank you rumpig! took me about 2 hours to join the bloody wires! got another question since i've seen you've answered quite a lot of questions about the tunit chip what did you do to tap into the accelerator? i think i might've done mine wrong cause i just took it for a test drive and felt nothing
ok this is what i've done to wire up my chip, 12v supply from the stereo, neutral back to the battery. the white wire is connected to the accelerator at the ecu, and the black wire from the chip is connected to the top right pump wire the brown for the pump is back to the battery, now what the chip is doing is it's a solid green light when i turn it on no flashing at all, i've rev it to 4-5rpm full throttle and it doesn't change to a red led light at all i've looked at all the connections all wires seem to be making good contact with each other only thing that may be causing troubles is the earth for the pump but i've tested the resistance and i'm getting very very low resistance from the frame of the pump and the main neutral so it should be fine right?
