scotty_dee
Member
Hey guys, I've got some Hella spotties on my Navara, but looking to upgrade to some Lightforce 240s. Can I use the same wiring harness that's already in?
Thanks
Thanks
Driving light harness
- Thread starter scotty_dee
- Start date
Help Support Nissan Navara Forum:
Depends on the quality of the original install. My thoughts would be yes, the existing harness should be OK.
Check the size of the fuse and relay for the current load going through them - and make sure there is no scotch locks anywhere in the loom. Thats the common cause of spot light wiring failures that i know of.
Check the size of the fuse and relay for the current load going through them - and make sure there is no scotch locks anywhere in the loom. Thats the common cause of spot light wiring failures that i know of.
K
KraftyPg
Guest
Woody's right it should be OK, wire is wire, if one works then electrically so should the other but check it to make sure everything is fine to save yourself possible heart ache later. Also don't rely on who fitted it (i.e. pro or factory) unless you know and trust the fitter make sure you or someone you trust does the checks.
Aussie Frontier
Member
The other thing to think about is the wattage of the globes. If your taking off 100 watters and putting on new 10 watters then you should be ok
