Hey guys, i posted elsewhere about these a while ago. I had alot of issue fitting them and got frustrated. took me a while to want to have another go.
Since i have installed them. they work great once you sort out the issue.
Issue 1. No attachment point for 2002 navara grille as the grille attaches to the light with the standard unit. (fixed with a bit or metal bracket made up.
Issue 2. The attachment point on the side panel, the "bolt" or "fitting" is larger . This is fixed by exchanging them from the old unit to the new unit.
Issue 3. New unit Bolts under the top corner of your Quater Panel. As i did not wish to grind off the nut for the original unit, I simply bent the new one under.
Issue 4. H4 to Dual H1. Pretty simple fix with a metre and some connections. Find your low-beam wire and connect to the positive to the projector lamp (the lamp black at the front). Once Then connect your High Beam to the reflector lamp (the one with the silver reflector behind the lamp, or where the lamp is visible). Then simply connect the ground's together.
Issue 5. Turn signal. The original unit uses a clear globe and a orange lens, Easy replacement to a Orange globe solves this.
Issue 6. This isnt so much a issue as a design of what you want. I decided to wire all the led's (The 2 Halo's and the 3 leds above) together as my parker. As i don't require daytime led's. This is simply done by connecting your parker cable (small led socket with 2 wire connection) to the Led packs.
Then it was finally over.
After deciding to get in and get it done and figuring it out. All up this took me about 2 hours to complete with making it neat and making the brackets for the grille.