Changing/fitting Fog light bulbs

[JPMC]

Every now and again we seem to get people asking about fog lights.(IE: how to fit or how to get in to change bulbs).

Anyway I had to get into my fog lights today to remove some moisture that had got in there so I thought I might as well take some pic's and do a bit of a how to for anybody that's interested in future.

There are 4 screws to remove.
The first 2 are in the wheel well as circled in the picture below.

Then the next 2 are under the bumper inside the wee wheel spoiler as circled below.

Now ply out the inner guard with your hand.

See next post for rest of story.

 

[JPMC]

Now look inside and there is the back of the fog light.

To remove the bulb it's just a matter of twisting the bulb and pulling out.

And if you don't have fog lights and want to fit them it's just a matter of unclipping the blanking cover and pushing the fog light base into the same spot, as the cover as they use the same mounting tabs(As you can see from the photo below).
(requires some force and a flat head screw driver to undo the clips).

 

[KraftyPg]

Well done JPMC, someone should have done this ages ago. Now if only we can get people to use the search function they might find this before they ask next time.