Catch Cans (2 sizes) - Forefront Industries

[Forefront Industries]

Oil breather separation at its best!
With Replaceable Filter!
( compatible with "Provent 200")

Allows you to filter the air from your crankcase and separate harmful oil from your inlet system
stops oil entering the turbo and keeps the inlet track free from sludge which can be a huge problem in some diesel motors

Universal fitment
exactly as pictured
rated at 90% + oil removed from the crankcase return air
comes with replaceable air filter
Features an oil drain that can be capped or returned to the sump etc
excess pressure relief valve
Pressure regulator
completely legal (closed system)
factory appearance

I have 2 sizes of these available. please see dimensions below

Small = $99 inc free delivery and gst
Large = $129 inc free delivery and gst

if you have any questions please feel free to ask.

 

[Jon]

So these have the washable filter? Also I read in another thread somewhere you were looking at getting billet adaptors for the hoses. How far off is that mate I will buy the small one as soon as its available.

 

[Forefront Industries]

The new stainless washable filters are due this week Jon

I'm still working on the adapters at this stage Jon ....working out the best way to do them

 

[RustyNav09]

Just keeping myself posted in the thread. I will be hunting a small one for the d22 yd25.

 

[DaveHAT]

One washable filter for the small version here also please ...

 

[nathand22]

Im keen, but would like to know what size is recommended for the D40 with its cramped engine bay?, which leads me to my next question where are people mounting these??

I did see a few putting them up front behind the grille next to the headlight, is that the only place?

 

[Forefront Industries]

Ive had some reports of passenger side firewall corner (small model) hopefully some d40 owners report in with pics

 

[DaveHAT]

Im keen, but would like to know what size is recommended for the D40 with its cramped engine bay?, which leads me to my next question where are people mounting these??

I did see a few putting them up front behind the grille next to the headlight, is that the only place?

This is mine fitted to the left inner guard near the stupid "fuse box" with the taillight fuse in it.

Fabbed a small bracket from a roller blind bracket & uses existing bolt holes.

Tight fit and you need to remove it to access the stupid fuse box but ... tidy and OEM in appearance IMO.

Still got a few of the brackets left over if anyone's interested in going this way.

 

[Forefront Industries]

Neat install!!

 

[nathand22]

Very nice install, although I will need to find another spot as that is where my pre-filter sits.

 

[DaveHAT]

The new stainless washable filters are due this week Jon

I'm still working on the adapters at this stage Jon ....working out the best way to do them

Updates on the stainless washable filters???

 

[camo.b]

Where and how is best to buy one of these?direct from you or ebay...actually im only assuming that is you guys on ebay

 

[Navmania]

I am interested in one of the washable filters. Will they be available to buy separately. And am I rite that it will fit the Provent 200 catch can.
I will watch with interest.

 

[Forefront Industries]

Updates on the stainless washable filters???

due tomorrow....i can put pics up if you like?

Where and how is best to buy one of these?direct from you or ebay...actually im only assuming that is you guys on ebay

you can do either...but direct through me is best so i dont give away any more money then they already take... PM me camo

I am interested in one of the washable filters. Will they be available to buy separately. And am I rite that it will fit the Provent 200 catch can.
I will watch with interest.

yehp can buy them seperately and yes have one for the 200

 

[user 10312]

Looks like an exact rip off of Provent or is it a provent?

I'd like to mount a water separator up near the fire wall next to the fuse box so was thinking of mounting it behind the bull bar looks to be a ton of room in there. Do you think the hoses will be to long? I'd be willing to use fat hoses and reduce the it at the rocker cover out let and induction inlet rather than the catch can.

 

[Nakkers]

This is mine fitted to the left inner guard near the stupid "fuse box" with the taillight fuse in it.

Fabbed a small bracket from a roller blind bracket & uses existing bolt holes.

Tight fit and you need to remove it to access the stupid fuse box but ... tidy and OEM in appearance IMO.

Still got a few of the brackets left over if anyone's interested in going this way.

Mate I would love a bracket, i can pay you plus postage even . I have the same catch can and the bracket is the only thing holding me back from installing it. Well done by the way Ive been scratching my head trying to work out how to fit it !

 

[Navmania]

I have sent a PM mate.

Cheers.

 

[nathand22]

Looks like an exact rip off of Provent or is it a provent?

I'd like to mount a water separator up near the fire wall next to the fuse box so was thinking of mounting it behind the bull bar looks to be a ton of room in there. Do you think the hoses will be to long? I'd be willing to use fat hoses and reduce the it at the rocker cover out let and induction inlet rather than the catch can.

I was thinking of putting it in front of the airbox behind the headlight, because i run my pre-filter up near the firewall, fuse box and ABS control

 

[Sunny Coaster]

I got the chip it catch can and it's massive, wil have to get creative with the mounting

 

[DaveHAT]

due tomorrow....i can put pics up if you like

That'd be sensational.