3" Body Lift
- Thread starter snowy85
- Start date
Help Support Nissan Navara Forum:
gshannon
Member
Are you not happy with the 2" you already have?
I settled on the 2" as I didnt want to modify brake lines, fuel filler hoses, steering rod etc etc etc.
You could easily have a machinist turn some 75mm blocks and im sure most fastener suppliers would stock some one inch longer than what you already have. Just take them out and mesure them up, longer ones can always be cut down
I settled on the 2" as I didnt want to modify brake lines, fuel filler hoses, steering rod etc etc etc.
You could easily have a machinist turn some 75mm blocks and im sure most fastener suppliers would stock some one inch longer than what you already have. Just take them out and mesure them up, longer ones can always be cut down
maddogrc
Member
what happened to not spending anymore money on it? haha
Leprechaun
Member
- Joined
- Apr 3, 2009
- Messages
- 2,792
- Reaction score
- 2
Probably have to replace heater & A/C hoses, radiator hoses, fan cowling, extend gear gear shifters.
You going to run some 37"s?
You going to run some 37"s?
joshy
Member
- Joined
- Oct 1, 2008
- Messages
- 2,088
- Reaction score
- 0
Alot of effort for 1 more inch if your not going to make the most of it by running bigger tyres as more bodylift is only going to very slightly increase your approach and departure angles, wont affect your ramp over as chassis sits below the body.. that would let you run 36/7" tyres as you can fit 35" under your current set up.
But each to there own.
But each to there own.
I reckon 35s would rub now on full flex....would be close... If i was to change to 35s it would mean doing diff ratios aswell.... get a bit pricey. Yer i realise all that. hmm
