Search results

Looks like it is the Headlamp Aiming Motor. Has anybody replaced similar unit on back of Head Light? Are they available separate from Head light unit? It appears not all models have this option? Current solution is to leave disconnected until options are clear. Is it possible to remove head...

NP300 D23 STX- Had my ignition on (motor off) and no lights turned on and aircon turned off. Opened bonnet and a loud buzzing noise was coming from the back of the front LHS head light unit. I first thought I had a wasp nest. Took battery out but kept power connected via jumper leads. Was able...

Also, monitored “ oil dilution %” and it got to 8% at my 5000km oil change without showing any errors on my scanner.

DPF. Been monitoring soot grams build up weekly since buying an AP200 scanner. Since reducing my oil change frequency to 5000km no more oil dilution errors have occurred and the soot ranges between 12g and 5g. This indicates that DPF burn offs are occuring reqularly (not being hindered by other...

Hello Scott, did quickly check my NP300 procedure and it is the same except you select NP300. I started with ignition off and hazard switch on and was instructed to turn ignition switch on at a latter point. I also stopped prior to erasing all fobs as I have lent the car and do not want to have...

This the menu I am presented with under Hot Functions.

Yes I did check Autel.com AP200 coverage and many menus available but when you go to do it the one “Burn new fob” or similar does not show up as an option. YouTube info for other vehicle types is clear and easy to follow but no NP300 info. The manual for AP200 is very limited. Thanks for interest.

Update. It appears that the AP200 scanner will work on some models to program new fob keyless devices but the menu is not available for the Navara NP300. North American support pushed me onto Asian support who were unhelpful and refered me to their professional dedicated key fob devise (IM508)...

Hi Matt, Do have the same option for a Navara NP300 D23 twin turbo 2015?

Thanks Scott, been awhile but do you remember the procedure? Get the “confirm fob ID” first then ?.? See attached menu from Maxiap200. Any advise greatly appreciated.

Hi Scott, when you programed the new key did you have to reprogram the keys still working? On the NP300 manual and Maxiap200 scanner manual it appears that when you add a new key fob you have to program all key fobs. Have a question about this in Autel tech support.

The original key fob has a id number “FCCID: CWTWB1U825”, visible with magnifier. The key has to be removed first to expose number. EBay fob key arrived with same ref number stamped on it. Next to program.

Looking at eBay key fob for NP300 2015.. Can anybody confirm spec below is correct for NP300? Thanks. Specification: Frequency: 433MHz Color: Black Material: ABS and Metal Button: 2 Buttons (Lock, Unlock) Transponder Chip: ID46 Chip Blade: Uncut, need to be cut by locksmith Battery/...

N/a

Hi has anybody had success in replacing valve stem seals without removing head? See youtubers pressurising cylinder on TDC to 100psi and compressing valve springs to remove collets. Does it work? Thanks

Hi, has anybody found a good youtube video on changing Navara (2015) D23 drive chain? Any gems of wisdom in doing it yourself and things to watch? Thanks in advance.

It pays to measure total volume of oil removed in the 3 step flushing of oil and ensure that the same volume is returned to gear box.. Do not rely on the level of oil being correct by draining box oil via the “level fill tube”.. In my case before I did anything I opened the level filler plug...

Does anybody know the alarm % setting for the oil dilution error?

Decided to investigate knocking in back of Ute on rough road. All good until I shook the Nissan aluminium sports bar! Pushed bar and it almost fell off. All 4 aluminium mounting brackets had broken and only brake power cable was holding it in place. Could have been a disaster