Hand brake Conversion to Facelift model

Nissan Navara Forum

Help Support Nissan Navara Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

DeanS1189

Member
Joined
Feb 4, 2025
Messages
6
Reaction score
1
Location
Seychelles
Hello! So, I have a D22 from 2000, QD32, and I’m working on restoring it, however, I’ve noticed that most of the trunk has been eaten away by rust, and the cabin has had rust chewing on most of the underparts, and after doing some digging, I got my hands on an intact cabin complete with all the interior bits and I noticed that the hand brake on the other cabin is not under the steering wheel, but in the centre, on the cabin, I was looking for some info, if the rear drums are compatible with brake cables from the facelift or if there’s anything extra I need to accommodate this change. Thanks!
 

Attachments

  • IMG_0380.jpeg
    IMG_0380.jpeg
    2.6 MB
  • IMG_0393.jpeg
    IMG_0393.jpeg
    3 MB
  • IMG_0396.jpeg
    IMG_0396.jpeg
    3.7 MB
  • IMG_1201.jpeg
    IMG_1201.jpeg
    109.3 KB
no idea on it.
the book says nothing major has changed. odds are there is bolts holes etc already there for it in the cab. plus its only the front section that changes, the cables to the drums are the same. not much changed over the years.
bench seat models usually came with dash mounted, bucket seats had the floor mount.
 
Back
Top