Dirgs
Member
Hi I’m Ingrid new member and needing some help with my 2013 Nissan navara pulleys.
New member
- Thread starter Dirgs
- Start date
Help Support Nissan Navara Forum:
Dirgs
Member
Hi.thank you for answering.well 1stly had a shredded main belt so replaced that.Drove down the road and shredded again.so replaced the main belt tension guide and the bearings and belt.all was fine for couple weeks then started making a slight squeal so had to replace the idle pulley as bearings were gone and belts again as somehow shredded again and now the main belt still seems to be going to off track around the water pump area.iv had my navara for around 2 months and have only had it on the road for 2 weeks of that time.im at a loss to no why the main belt still working its way off and was wondering if there’s any common problems in that area.Everything looks lined up so could it be water pump issue?
Colonel
Member
Check that all pulleys are straight and tight. You should be able to a miss-alignment while watching when the engine is idling. Keep watching the alternator pulley when you get someone to put a big load on the electrical system. My alternator pulley fell off when someone else was driving and they cooked the motor (new head needed). That pulley has a clutch which wears out. Good luck.
