Thailand or spain

[Snapperman]

Hi all Im new member,
My Nissan navara D40 is 2010 st model, Need help with tub, How do I know if its thailand or spain?
My tub got damaged on right side so was going to buy other tub from nsw, Their is 2012 st model will it fit on our?
I was told look at fuel flap if it key or not... Mine no key but other has?
was thailand and spain tub has different sizes?
I need to check first before I buy from him..
Thanks for help
Cheers

 

[Old.Tony]

Welcome to the forum.

I'd say yours is a Thai build. Have a look at your car's VIN - it'll probably start with 'MNT'. Spanish built cars have VINs that start with 'VSK'.

 

[Snapperman]

Thanks Just looked its was thai...so if any thai tub will fit straight on our?

 

[Old.Tony]

Thai of the same build type. Thailand built three models in 2010, the ST, RX and STX King Cabs. The ST should match yours, the RX will but has steel bars affixed to the front that you might want to remove, and the king cab is way too long.

 

[nathand22]

there is a slight difference in size between the two tubs but it wont stop you from fitting either one to your Thai ST.
The thing that is different is the colours they come in, for eg the white of Thai is different shade to the white of the Spain and when put side by side they look totally different .
You will also find that other colours were only produced in one country.

 

[user 10312]

there is a slight difference in size between the two tubs but it wont stop you from fitting either one to your Thai ST.
The thing that is different is the colours they come in, for eg the white of Thai is different shade to the white of the Spain and when put side by side they look totally different .
You will also find that other colours were only produced in one country.

Yeah kind of, although the physical dimensions are the same, the bolt holes for where it mounts to the chassis will be differently spaced so yes it will fit with a bit mucking around, maybe drilling a hole here or there and look fine but it wont be a straight bolt down job.