nissan d22 vibrating

[copppergaskets]

HI THERE I have just joined on hear... I own a 2010 4x4 d22 I have a vibrating problem with it from 90 klm to 120 klm had the problem since new

 

[bods]

First I've heard of it... I've had mine up to around 140 and haven't had any vibrations.. sounds like you got an average one though

 

[fourocker]

90 - 120 kph in 4wd and hubs locked in, am I reading this right ? That's a combination I've never had to try and would expect vibration at that speed in 4wd.

 

[copppergaskets]

90 - 120 kph in 4wd and hubs locked in, am I reading this right ? That's a combination I've never had to try and would expect vibration at that speed in 4wd.

that's with all wheels jacked up only to get the front wheel turning as it vibrated and also I tried it with the lockers off and no vibration t from drive shafts spinning with no vibration put the lockers in and it vibrates

 

[180degrees]

Hard to tell exactly what you are trying to say due to such poor grammar.

So it vibrates everytime you drive it without the hubs locked in? or it vibrates only when your lockers are engaged?

 

[copppergaskets]

Hard to tell exactly what you are trying to say due to such poor grammar.

So it vibrates everytime you drive it without the hubs locked in? or it vibrates only when your lockers are engaged?

it vibrates all the time in two wheel drive and 4wd drive the test I have done found the parts of the hubs are out where the rotors are bolted on... so iam going to remove them and machine they are out of 5 mill that makes the vibration so they are no true ....as not round that seems to out of shape and yes my spelling not so good .... but good in finding problems so after all that has any one on hear has vibration on there 4 wd like the teeth chattering I see some post on hear

 

[KevinE]

G'day mate, I have the same model & mine has recently started doing a similar thing, only mine does it more at low revs. It drives me nuts! Driving along in 2H going from zero to 1st, 2nd, 3rd, 4th & no issues. Cruise a bit at 60kmh, traffic speed drops to 55 ish, then picks up & I accelerate in 4th (just slightly to keep up with traffic) & the whole ute shakes. If I drop it back to 3rd (higher revs), the issues evaporates. Same thing happens in lower gears too. I've checked everything I can think of & nothing seems loose. BUT........... when I had my wife replicate the revs while I had the bonnet up, the noise seems to be coming from the fan belts??? Is that possible???

Cheers,

Kevin.

 

[copppergaskets]

G'day mate, I have the same model & mine has recently started doing a similar thing, only mine does it more at low revs. It drives me nuts! Driving along in 2H going from zero to 1st, 2nd, 3rd, 4th & no issues. Cruise a bit at 60kmh, traffic speed drops to 55 ish, then picks up & I accelerate in 4th (just slightly to keep up with traffic) & the whole ute shakes. If I drop it back to 3rd (higher revs), the issues evaporates. Same thing happens in lower gears too. I've checked everything I can think of & nothing seems loose. BUT........... when I had my wife replicate the revs while I had the bonnet up, the noise seems to be coming from the fan belts??? Is that possible???

Cheers,

Kevin.

put new belts on or just tighten them up if they are cracked replace them... my problem is the front hubs out of round

 

[KevinE]

Now I get why the comment about poor grammar was posted above lol!