New member sydney

[chrisv22]

Hey all new member from Sydney. My Navara: 2011 D22 2.5 So far only mods are factory bull bar, sports bar, snorkel. Sunraysias with dynapro hancook MT. Future plans are to get snake racing 3" sports lift kit. I've done a search and couldn't find anything solid regarding pcv valve. Does the D22 2.5 (YD25) have one and if so where is it?

 

[Old.Tony]

Welcome to the forum.

Every car has one - petrol or diesel. It will be located (on most engines) at the highest point of the motor - usually the camshaft cover in an inline configuration - and likely towards the back of the engine bay. A hose will connect the PCV outlet to the intake. If it's turbocharged (like yours) the hose will connect to a point just in front of the turbocharger. If it's not, there should be a throttle valve it will have to connect beyond that - so not far off the intake manifold in a diesel. In a petrol, it will connect to somewhere near the inlet of the air filter box if it's a carby model, and maybe there as well if it's fuel injected because it has to connect somewhere outside the region controlled by the throttle butterfly.

 

[chrisv22]

Found it. Thanks for the reply!