My D40 aka glen

[Scottynoggs]

At the moment I have got issues with alot of camber in the front, gotta adjust the lca bushes and should get it all the way back to normal, and the toe is way off so gotta adjust that too.

Once I get it all adjusted ill post some pics and to you how it rides

For the record I removed the sway bar too.

 

[herb89]

righto thanks scotty and cambo, must be the difference between thai and Spanish built cause mine all the way out only just cleared the coil hat, cut the **** out of it this morn and had to take it nearly all the way back to the coil spacer to get any clearance. all good now though, cant wait to see your ute with the 2 inch spring lift!

 

[Scottynoggs]

Rough measurements is 660mm from middle of hub to gaurds in front and 700 rear

Anyone no what the stock figures are?

 

[Scottynoggs]

And no no need to cut the coil bucket I have a shitload of room hey

 

[herb89]

did you end up getting one of them dump pipes off ebay?

 

[camo.b]

Stock figures are very sad......never did measure it.

 

[Scottynoggs]

Average figures by the looks is 510mm at the front and 540mm at the rear.

That's 150mm lift in the front and 160mm in the rear

Correct me if I'm wrong but that's a rough 6" lift? Or am I missing something. Might have to drop the front down a bit if I cat get the camber right though...

 

[Scottynoggs]

Nah not yet I'm happy with how the pipe sounds I didn't want it loud just wanted to hear the turbo and that is what I got.

 

[herb89]

righto think I might do the same. couldn't imagine you wont be able to get your camber right after an alignment, they brought mine back to good even with the standard UCA's and that's was with 2 inch spring and 35mm spacers.

 

[camo.b]

You boys running thai or spainish built trucks?

 

[camo.b]

6"sounds on the money.

 

[Scottynoggs]

Yeah and no dropped diff...

Spanish matey

Mines a far wack out, Id say 5 degrees positive camber

 

[herb89]

mines thai built wish it was spannish. yeah my camber ******** ridiculous I can believe they got it back good. the tops of the tyres were stickin outside the guards

 

[camo.b]

Yep thai here also.I'm at 4'lift and alignment is perfect. Uca are set in the middle.not much clearance to the coil bucket but enough.

 

[Scottynoggs]

I'll get a pic of the camber tomoz and pics of height

 

[Scottynoggs]

Here

 

[Scottynoggs]

Another one

 

[RustyNav09]

Nice 40, looks like it has some serious camber. On another note very very nice falcon. :-D

 

[camo.b]

Wheel alignment soon then?

 

[Scottynoggs]

First pic the camber wasn't sorted, camber is close to perfect now. Drives ****ing awsome. Aligned everything myself and it drives like when it was new so no I'm not getting a wheel alignment. Yeah lol the f6 just puts it into perspective.

On another note might put my new snorkel on tomorrow