Looking for a Factory Service Manual for 98-01 Nissan Presage (YD25DDTI)

[SinisterSntra91]

As the title states above. I am having a hard time locating one in .pdf that I can download. If anyone knows where I can find it (In english or not) if they can post a link I would be forever grateful.

 

[Dave]

http://www.navara.asia/d22-general-chat/3232-d22-navara-service-manual-download-97-08-a-10.html

The post I quoted by Hadricus.

Click on that.

Oh and welcome to the forum.

 

[SinisterSntra91]

http://www.navara.asia/d22-general-chat/3232-d22-navara-service-manual-download-97-08-a-10.html

The post I quoted by Hadricus.

Click on that.

Oh and welcome to the forum.

Thanks!

So I take it there is not much difference between the D22 YD25 and the Presage YD25?

 

[Dave]

Should be mate, there will be a few external changes as there from 2 different vehicles.

 

[SinisterSntra91]

Should be mate, there will be a few external changes as there from 2 different vehicles.

Excellent. Im not so much concerned with the internals as much as I am trying to get the wiring for the engine figured out. Do you happen to know if the ECUs are the same? I am planning to swap this engine into a vehicle that never came stock with this motor, so I need to pin out the engine wiring harness....

 

[Dave]

What is the engine going in ?

Whats the engine out of ?

Is the engine the CRD YD25DDTI or the Di YD25DDTI ?

 

[SinisterSntra91]

What is the engine going in ?

Whats the engine out of ?

Is the engine the CRD YD25DDTI or the Di YD25DDTI ?

Its the DI YD25DDTI out of a Nissan Presage, I am planning to drop it into a fwd Nissan. It comes awd but I have a suspicion there are some fwd transmissions that are compatible with it.

 

[Dave]

The sump and oil pump will need changing to. Same as the oil pick up.

YD25DDTI non CRD big end bearings are ****. Change them while your at it to aftermarket ones.

I thought only the YD22DDTI came out in FWD layout.

http://nmanzi.com/uploads/D22.zip

Download above and there is everything you need to know about the YD25.

Even abit of CRD info to.

 

[SinisterSntra91]

The sump and oil pump will need changing to. Same as the oil pick up.

YD25DDTI non CRD big end bearings are ****. Change them while your at it to aftermarket ones.

I thought only the YD22DDTI came out in FWD layout.

http://nmanzi.com/uploads/D22.zip

Download above and there is everything you need to know about the YD25.

Even abit of CRD info to.

Well the YD25DDTI out if a presage comes in a AWD layout. It shouldnt be much other than swapping flywheels and transmissions to make it a FWD layout, I suspect

 

[Dave]

Ah so there both East West setup.

Shouldn't be to hard then.

Keep us updated.