LLadnar's New STX

[LLadnar]

Seal's are from a company called Ovesco. Add extra seals to the canopy ass well, will look at getting more photos tomorrow.
www.ovesco.com.au

 

[LLadnar]

reinstall the Lower control arms and struts with supplied spacers.

refit the spindle to the Lower control arms, drive shaft and then UCA.

 

[LLadnar]

finish fitting brake calipers, swap the tie rod ends from from the left and right and turn them facing down. Fit the new extended brake lines to the front and back.
For the rear I fitted a set of Tough Dog leafs with the extended shackles. didn't use their lifting blocks. And fitted the Bilstein rear shocks.

Had a set of Dick Cepek FCII 285/70/17's

 

[04SilverSTR]

looking sweet mate, nice work!

bryan

 

[nathand22]

Hey Brad, hows the UCA's and struts? had a chance to fit them yet?

 

[Boxy]

looking good mate

 

[LLadnar]

Hey Brad, hows the UCA's and struts? had a chance to fit them yet?

Probably fit them next week mate or maybe this weekend

 

[LLadnar]

Fitted my Rockslides supplied from Scotty.

The sliders got a bit of work at the Muster, Have to pait touch up.

 

[The big rig 82]

Was that the 5 inch lift kit?

 

[LLadnar]

Sure is.
Caloffroad 5" kit to suit the 550.

 

[The big rig 82]

Sweet thanks mate

 

[4BYFOR]

Nice build up mate the nav came up looking very nice!

 

[LLadnar]

Thanks very much mate, she's not quite finished but I've been in a bit of a lull waiting on a couple of things. Must fit the UCA's and coilovers soon if nothing goes wrong.

 

[LLadnar]

These are way way over due. Photo's of the UCA fitted and the Radflo adjustable struts, I got these from PRG in the states, but you can get them from KPD4x4 in vic now.

also 32" light bar.