Fatboy Slim
Member
Hi, D40 ST Navara 2001 30000km - This morning I had a fault resurface. With the lights turned on I have low beam and a functioning left indicator. I have high beam if I flick the stick backwards but if I put it to high beam permenantly I have no high beam. I have no right indicator. If I turn the lights off I have both indicators. This appeared a few weeks ago and I had an auto electrical tech look at it. He found the battery had 1 bad pot and this was replaced. On getting it all back up and running the fault was still present. He then pulled the steering column and switch apart and cleaned all contactors and plugs. The problem was fixed. He did say that he found nothing he could hand on heart say caused the fault. I had the 30k service just completed and got them to look at a suspected fuel issue as I had a few misses/hestiations in power. Again nothing was found but it has now gone. Any ideas? I spoke to the auto electrician this morning and he has suggested getting Nissian to have a look. I have it booked in tomorrow with the local Darwin dealer.