Help with front suspension 3" springs?

[NAV2795]

Hi boys,
I know im probably turning up old dirt but couldn't find what I wanted in the search. Basically I got a 2" Terrain Tamer lift, and the nav looks front end heavy. I've always hated the way it sits and would like it improved. I Have around 50mm gap from the coil bucket to the Upper control arm. The actual lift was 40mm. Just wondering if I could squeeze the 3" springs under, and who sells them? Will I have wheel alignment issues, etc? Also i don't want spacers as I wont be covered by insurance in vic, Cheers

 

[TigerST]

IFS your stuffed. You need change control arms and a lot of costly parts. Then you'll need to engineer those parts too.

 

[TigerST]

Also remember the higher you go the less down travel you have

 

[ZORDO]

You could go with a strut spacer & UCAs
That way you will retain some down travel & fix the camber problems

 

[NAV2795]

Thanks for the replys, so basically cant just stick them in and be done with it not to worry