Front End Top Out

[dickyjoe]

Hi

I have a 2011 long tub D22. I've owned it since new.

It's clocked about 103,000 km and has since new and after I wound the torsion bars, topped out on the suspension rubber. It has a steel ARB bar and scrub bars but no winch.

Is there any tricks to improving the ride without lowering the front end of the car?

Is there aftermarket control arms or different control arm that will sort my issue?

It gives me the &^&('s.

Richard

 

[tweak'e]

with heavy front bar and lift you will need aftermarket torsion bars.

 

[bods]

If you mean topping out as in you have the bars wound up far enough so the uca is touching the upper bump stop, then yes, you can get aftermarket ucas that give you more clearance.

Calmini from america are the cheapest, I think superior engineering do one of their own now too, but not sure how much they are.

 

[bajatrailrider]

I had problem with Calmini UCAs.I installed low profile bump stops,with stock UCAs.Solved the top out problem.