Fitting 33" tyres Bible

[pbk1776]

You wont be able to run a 285 on a -28 offset rim without getting bigger flares.
Otherwise it will hang out past the flares at least 40mm.
I tried it on mine, and found 0 offset is best.
If you going to lift the body 2", you will have PLENTY of clearance with 33" tyres.

just to make sure that I understand this

you saying that 33" will not fit on -28 with only 2" sus liftt?
but with 2" sus and 2" body should be able to fit 33" on -28?

 

[180degrees]

Its going to stick out way to much mate, change your wheels to +20 in 16x8 and it will only stick out slightly

I had an epiphany does anyone here run 33x10.5 with just a 2in susp lift? I was thinking about it last night and thought I might be onto something.

 

[ben85]

just to make sure that I understand this

you saying that 33" will not fit on -28 with only 2" sus liftt?
but with 2" sus and 2" body should be able to fit 33" on -28?

on -28 rims its going to be hard even with a bodylift. will stick out heaps and will need lots and lots of grinding!

im running 0 offset rims, i would not go any more negative. +20 or 0 are the best options.

 

[George k]

Will 32"s fit on a 2" tough tog suspension lift ?

 

[180degrees]

yea easy, I have 265/75's on mine with stock suspension, had to trim the guards a little bit though.

 

[George k]

Ok mad I think I will go with 32"s ill let u big boys have the 33"s lol I wanna body lift but don't want the hassle with insurances n all that other crap as I live in nsw , I think 32"s will be enough for wat I wanna do , mostly city driving , carrying bikes , a lil offloading and alot of hunting ! Wat u guys rekon ? But I dunno if I should go All terain or muddys ?

 

[ben85]

285s on 16x8 0's, 2" suspension + 2" body lift

 

[ben85]

Ok mad I think I will go with 32"s ill let u big boys have the 33"s lol I wanna body lift but don't want the hassle with insurances n all that other crap as I live in nsw , I think 32"s will be enough for wat I wanna do , mostly city driving , carrying bikes , a lil offloading and alot of hunting ! Wat u guys rekon ? But I dunno if I should go All terain or muddys ?

32's (265's will be fine mate) i had them, they were good, went heaps of places.

 

[baggs]

hey how did you fit winch to that bar and how strong is it sorry for the of topic

 

[baggs]

As you can see, a slightly cut bullbar with a 2" lift all around =)

hey mate any pics of the winch install can you tell me what you did

 

[lukegaudy]

just wondering if it is possible to fit 33" tires with standard suspension but with 2.5" body lift

 

[tommy222220_0]

no worries.

Suspension provides no increase in clearance because the wheel still travels between the bump stops.

May have to trim guards near cab if you get 0 or -ve offset rims.

 

[Dusty_ben]

just a thought, has anyone fitted 305's to a D22? was thinking it would look sick having such a wide tyre under there

Was chating to the 80 series guys at work (there's a few). One has just got 305/70r16s on his cruiser. Wondering if these would fit on my22. What oddest and width rims would I need. Have 2" body and soon will gave 2" suspension. Would look killer with a wide tyre

 

[ben85]

don't know of anyone running them... but stick to a +20 offset and you should be right with a slight bit of trimming... or go 0 offset and trim more... but i wouldn't recommend that.
there was someone one here running mudzillas 33x13.5s on -26 offset... not sure if he even had a bodylift but he must have done a fair bit of trimming or there would be a lot of guard scrub.

 

[180degrees]

285's fit on the stock P40 offset to

so if anyone finds wheels in that sort of offset range the odds are 33"s will fit with minimal trimming.

 

[dilmah]

You would have a hard time fitting 33's to a stock 16x7 rim. unless they were a really skinny 33

 

[180degrees]

few pages back a guy has 285 MTZ's on the stock wheels, fatboy has 285 KM2's on a 16x7 wheel to.

 

[ben85]

plenty of people have done it, but its not generally recommended.

 

[Navd22yd25cr]

Whats the best tyres to fit a 2010 str? What the biggest i can get with only a 2" sus lift and only have stock str rims

Would 265/75 be the way to go or could i get 285/75 to fit with no hassels?

How much strain would be on the cv's having those wound up with 33" if it fits

 

[180degrees]

go 265's mate its alot of ****ing around to put on 33's