D22 part number's, buy something. Post the part number here.

[chucky]

Repco aftermarket fanbelt Gates Micro-V AT -----Part no- 7PK1640 normally $77 got it for $55

 

[Obie]

Can't find the listing for this tow bar

I have a towbar listed as D22 Part number G9162-VK400AU
I can't find it listed anywhere and therefore don't know which it will fit
I purchased it new off the net for my 09 jap built, but it dosen't fit.
Want to sell it but what's it go on.
Got me baffled

 

[evilash]

how did the foot rest go and is it legal?
Any pics please?

 

[Navvic]

Nissan chrome towball : G9180-NCR00AU

 

[shaggy]

Hi guys

Here is the part number for the rubber seal at the back of the engine bay.Its the one in front of the plenium where the bonnet sits

p/n 66830-2S410
It costs about $40

Shane

 

[RustyNav09]

KN Filter For 04?-11 D22. Mine is an 2009 Model ST-R

Product Code is KN E-2020

Purchased from Queensland 4x4 in Deception Bay also cna be purchased off there EBay Store.

Perfect Fit if not better then Genuine fit

 

[Dave]

I bought a heap of shit of Garry recently.

Ill bump this so I can add them tomorrow.

 

[Dave]

These are the new turbo hoses I got.

Dave.

See the Silicon hose on the turbo.

Have a brand new one I dont need anymore as the new turbo is different.

Free to good home.

First to sing out gets it.

 

[jap55s]

singing out!!!!!!

 

[Guido]

Just got a new alternator put in my D22. Not genuine but the part number is HXA070 and is a 90amp version.

Guido

 

[SimmoD22]

recognize this part number??? help??

long time reader...1st time posting...

Does anyone recognise this part number F2210 VK700AU

It is on a D22 steel winch compatiable bullbar that is for sale, spoke to fella but he cannot tell me what year(s) the bar fits as he purchased for a Hilux ???...
short of it is will it fit a 2006 D22??
Any help is appreciated!

Part number for the standard steel winch bar for 2006 D22 is
F2210 VM000AU
This bar is rated for 9000lb winch only...

 

[SimmoD22]

Think l found the answer here....
http://www.nissan.com.au/webpages/resources/information/accessories/NavD22_Accy_Web.pdf

If l read it right, page 6 says
Bullbar, Alloy (4x4) F2200 VK700AU...
l think the part numbers wrong...... or the guy misread it....????????????

 

[tony d22]

Ring your Nissan dealer and ask them, they will tell you if it's compatable with your truck.

 

[terryc]

Some Nissan parts for my 2010 D22 STR.

N*21501VM70A Hose Radiator
N*215032TBOA Hose Rad LWR D
N*11720VK500 Belt - Fan & Alternator
N*0211777253 Belt - Power Steering
N*0211791023 Belt - Compressor

Next three are all to do with the fuel filter
N*1640359EOA Cartridge Assy (fuel filter)
N*1640105E00 Seal-O Rings (M ???
N*16407W4900 Fuel filter SE ???

N*16546VM00A Element ASSY - ? (Air filter).

 

[shaggy]

Hi Fella's

Oil Pressure Switch for ZD30 engine

25240-4M40E

Shane

 

[unkn0wn]

1999 qd3.2 D22

Lower control arm bolt, aka lower link spindle - 54419 b9500
Nut for the above - 08912 9441a
Washer for above - 08915 5441a

Lower link spingle bushing - 54560 01g00

Rims, 16 by 6 (no information on offset) - 40300 37g00

Reverse switch (in gearbox) 32005 21u1b

 

[coolbigrock]

all zd30
clutch fork retainer spring 30534-03E00
crankshaft rear oil seal 12279-2w201
rear seal 33142-33610

 

[ShortyNavros]

Ok silicon hose, turbo side part number is SC-45-blu. Cost $30 from supercheap auto. Special order, gonna order another as a spare.

Plenum side, cant find the reciept at the moment but on the hose on the barcode says CAL6363254. $30 from memory. Patr number is 155208

Turbo side is 45mm, plenum side is 63mm. The plenum side piece of hose is enough to replace it 3 time's. The turbo side is a perfect fit for one use.

Boost gauge, Autometre. Autometre's part number is AU5404, only boost no vacumn and liquid filled and goes to 35psi. Autobarn's part number is EL06526. $180.00.

Pyrometre, Autometre. Autometre's part number is AU3344-M. Autobarn's part number is PE20875. Reads in celcuis and has a range of 0-900C. $380.00, thanks Kev for giving me some cash back. Even though its helping the American economy.

Plenty more but I gotta dig through my reciept's.

Dave.

Tried purchasing the 45mm turbo side silicon hose from supercheap and was informed they are no longer able to supply them. Struggling to find somewhere who sells them, autobarn can order in a 3 inch section of 1.75" internal diametre silicon hose which is the closest I can find (inches to mm conversion = 44.44mm). Anyone find somewhere apart from genuine nissan ones which apparently are $130 ea???? According to an earlier post? Outrageous for a bit of silicon.

 

[thewanderer]

I found them on eBay... Think it was bout 30 bucks for both if them with delivery..

 

[ShortyNavros]

Just so you guys know as supercheap now no longer stock the 45mm turbo side silicon intake hose, I bought one from Autobarn. It's a ProFlow 1.75" straight 3" Length Blue Silicon Hose, code on the packet says PFESH101-175. Cost for the part was $10 but they had to order it in so it was $25 with delivery included. I think the only other length you can buy this in is 1 foot which is overkill but would no doubt take the cost down if you keep it to replace it again if necessary, not sure on what price that is though. For the record 3" is the perfect length to replace the original part.

Also went to Nissan, they wanted $140 hahahahahhaha, what the actual f*ck

Cheers,
Shorty