clutch slave cyl help ??

[garethapocalpyse]

hay thank u for chance to talk to people with problems same as mine . thank u .were do i ask, i have just put new slave cyl into my navara but iv done somthing wrong cos not working right at all

 

[Horatius]

hay thank u for chance to talk to people with problems same as mine . thank u .were do i ask, i have just put new slave cyl into my navara but iv done somthing wrong cos not working right at all

Did you bleed the air out after changing it? There might be air in the cylinder or in the line?

 

[garethapocalpyse]

M8 I HAVE SO MEAY TIME,S . IT SLOWLY GETING BETTER. BUT THINK I MIGHT NOT DOING IT RIGHT OR I GOT LEACK. WHAT BEST WAY TO DO IT
THANK U FOR YOUR HELP

 

[Horatius]

Just fill the reservoir up and get someone to push the pedal, holding it to the floor while while you open the bleed valve. Then close valve and lift pedal back up. Continue until there is no more air in it (keep checking the reservoir has enough fluid in it or you'll suck air into the master cylinder). That's the basic idea.

I use one of these for the clutch and brakes, works well. Don't need another person to push the pedal. I replace the brake and clutch fluid occasionally.

What model car and what was the original problem, was the slave leaking or just the clutch not working properly? Is the master cylinder alright?