Captive Nuts?

[user 12270]

Hi all, how have you connected your drivers side recovery point? I did the passenger side though there are no captive nuts in the holes on the drivers side :-(

 

[ourd40]

Hi mate, I found a couple of bolts that i could fit in through the holes and tacked a wire on to hold them in place.

 

[user 12270]

Thanks mate, I'll look into it

 

[mike1303]

Welded some rod to the bolt! And fed it down through the hole bolted then recovery point up.

 

[mgermasi]

I welded 2 nuts on a bit of flat bar 5mm X 20 mm fed through the front of chassis.
hope it helps

 

[user 12270]

Thanks Guys,

Been thinking of doing that mgermasi...just have to remove the bloody bar!