Canopy LED brake light

[Lorry@Nivara]

Hi Guys
I have a issue with my newly fitted Rhino-man canopy brake light.
Everytime I push the brake pedal and the car radio is on, the radio lost it signal.
As soon as I release the pedal the radio turn back to normal play!
Can anyone please assist with this problem?

I was thinking of installing a Ferrite core clip on the two wires supplying the brake LED?

 

[MANNING]

Hey there @Lorry@Nivara
It may help to mention what type of navara you have

 

[Old.Tony]

I wonder if the LED driver is emitting a lot of RF, and the car's antenna isn't quite in the socket on the back of the radio properly ... maybe check that plug!

 

[Lorry@Nivara]

It is a

2021 Nissan Navara 2.5DDTi Double Cab LE 4x4 Auto​

 

[Lorry@Nivara]

Morning. I've checked the antenna and all fine.

 

[Billy54]

I had the main headlights changed to LED and if I turn the lights on in an area where the signal is strong then no worries but as I get further away then the radio starts to fade. Turn the headlights off and back comes the station. I think Old.Tony is on the track with the RF from the LED driver. I just say, time to put one of those new Technology things in the slot called......A CD!

 

[Lorry@Nivara]

Good morning all.
I found the problem on the Canopy brake light interference.
The manufacturer informed me that it was a bad batch of LED lights they received from their supplier.
Apparently there must be a resistor installed within the light to prevent RF interference which was not done on the batch.
They will exchange the light cost free.