Ball joint spacers

[Sunny Coaster]

Has anybody bought or made ball joint spacers for the Calmini UCA's.....?
I have a 2n2 lift at the moment but want a bit more room up front for when I upgrade to 285's.
4x4Parts in the US sell the spacers but they were unable to tell me if they will fit the calmini arms, seems how there arms would bolt onto the same pattern I don't see why they wouldn't fit....

 

[bajatrailrider]

If the stock ball joint fits the Calmini UCAs it should work. Or same bolt pattern

 

[bods]

Depends how thick you want the spacers... You could get an engineering shop to CNC some out of some 10mm steel sheet, or thicker, if you want them thicker... If you can sketch a scale drawing with the bolt pattern, etc on it they shouldn't have a problem making them. What it would cost I have no idea though, unless you can get a decent picture or scale drawing of the 4x4parts ones...

 

[Sunny Coaster]

Theres a pic on there site and for half " spacers shipped to my door they are only 100bucks so not to bad at all, saves all the running around

 

[dilmah]

Just make sure you use the correct bolts. Ive sheared a few off. 8.8's are a must

 

[Sunny Coaster]

have you got spacers dilmah....?