Search results

Hi all, I have a 2000 D22 with a non turbo QD32. Great engine but noticed today coolant appears to be coming from starter motor housing. I have looked at manual to see if there's core plugs in there but it tells me nothing. The engine has never heated as long as I've had it, needle always...

Thanks. The last trip was over easter and we out in the middles of the storms around Boorabbin, lots of mud. I gave it a real work out with the pressure cleaner so thought maybe some water/mud got in somewhere and bound it all. Hasn't faulted since.

G'day allSince my last bush trip my 2000 QD32 has been on a ramp for a couple of weeks. Worked fine and no hint of a problem until today. Started up but cannot get it out of neutral. When I try to force it there is a very slight hardly noticeable movement forward or reverse and no graunching...

Thanks cobber

G'day all. I have a 2000 D22 single cab Tai build. I cannot find a fuse for the reversing lights. I can find 1 FB behind the battery and one inside below and to the right of the steering column . Neither have a space for reversing lights. The lights don't come on with reverse gear but the...

thanks nedm1989, appreciate that.

D22 QD32 throttle spindle Greetings all. I've got my hands on a 2000 D22 and it looks to me like I don't get full throttle. When I press the accelerator pedal to the floor, the spindle only moves about 30 degrees. Given that I can move it about 90 degrees by hand, I reckon it should be more...

You can use JBran's wiring diagram for that.

My 2007 ST-X 6SPD has now done 127K and the clutch is now playing up. I quickly learnt to take off slow, then hit the gas. But have been towing a 2T caravan around OZ since April and because a lot of the caravan park sites are not level (reversing in uphill) and very tight it is hard not to slip...

Spend a couple of hundred and put it on a dyno. I had to do that for a different problem. Nissan (prob most dealers) diagnostics aren't all that good unless there's codes to tell them where to look.

I have an 2006 4.0L V6 (118,000KM) which was having some power and oil usage issues lately. I'm pulling a c'van around OZ so it's easy to notice changes. Last week I had it in Sunco Nissan to sort it out and they told me that there is no problem with the engine BUT it had the wrong grade oil in...

Greetings. I have an 07 D40 V6 coming up to 100,000KM. The service book says replace timing chain. A mechanic mate says it's not necessary and that he checked with a Nissan service manager. He says it wont break and when it's stretched enough to make it ping, then change it. I'm a bit nervous...

I had ARB Midland fit a 160L tank about 18 months ago. Used same sensors etc. Stays on full for 300KM. Does not sit low but is pain to fill right up because tank inlet is blow top of tank. It's l\not a lot of difference though. Can't remember how much but had a bullbar and tank supplied and...

I have a OZTENT and are as good as the promos. No bull, up in 30 seconds and unless breezy I don't use pegs. Expensive but they are very easy to setup and put away.