Search results

http://www.ebay.com.au/sch/i.html?_from=R40&_trksid=p2050601.m570.l1313.TR0.TRC0.H0.Xd40+egr+blanking+plate.TRS0&_nkw=d40+egr+blanking+plate&_sacat=0

I've got an Oztrail Mitchell double. Got it BNIB on Ebay for around $350 a few years back. It's a great swag. It has good ventilation when opened up, midgeproof mesh all over, plenty of room inside and watertight if the weather turns bad. Foam matress is 7cm thick and I found it more than...

Going by the manual for the CTEK D250S Dual, the CTEK starts charging the auxillary battery when the starter battery reaches 13.1v for 5 seconds (i.e the engine is running) and stops charging when the starter battery reaches 12.8v for 10 seconds (i.e. after the engine has stopped and the voltage...

I had an ARK power pack that had a 100ah battery in it. I put the 100ah battery into the battery box I made for the tray. Rather than buy 2 new 130ah batteries, I decided I would save a few dollars and get another 100ah (exactly the same as the one I already own, a century n70t) and put it...

I had an ARK power pack that the 100ah battery was housed in prior to going into the tray. Rather than buy 2 new 130ah batteries, I decided I would save a few dollars and get another 100ah (exactly the same as the one I already own) and put it back into the ARK power pack. I also ran an...

It is a NARVA panel. I bought it off Ebay for around $100 (http://www.ebay.com.au/itm/NARVA-6-SWITCH-PANEL-FUSED-PROTECTION-CARAVAN-CAMPER-ROCKER-LED-12V-63193-/321167481025?pt=Caravan_Parts_Accessories&hash=item4ac712d8c1&_uhb=1). It's good in that there are indicator lights when a switch is...

And a couple more pics.

More pics.

Hi all, just thought I would post up some pics of work I have just finished in the rear tub of my Nav. I have added a set if drawers that sit between the wheel arches. There is a flat panel across the top to make storing stuff on top of it a bit easier. I have also added two boxes that sit...

Now I have a few more questions. 1.With the Ctek being an MPPT regulator, should I get a panel without a regulator. It is my understanding that regulators burn off any excess energy coming from the solar panel to deliver a certain amount to what ever it is connected to. Would it give a better...

Cheers for that. One more question though. With the Ctek being an MPPT regulator, should I get a panel without a regulator. It is my understanding that regulators burn off any excess energy coming from the solar panel to deliver a certain amount to what ever it is connected to. Would it give...

Hi all, I have just put a Ctek D250s dual in my Navara. I read in the manual that they have a maximum input voltage from solar of 22v. When looking for a solar panel to purchase I am finding it difficult to work out what the maximum voltage from a panel is. There are a number of values...

I have been completing some work in the tub of my D22 STR. I have added a set of drawers made out of ply. They sit inside the two wheel arches. I have covered them with carpet and added aluminium angle to the corners for extra protection. Two 45kg, 700mm ball bearing runners were used to...

The compressor was an ebay special, Outbac (here is a link: http://www.ebay.com.au/itm/NEW-OUTBAC-12v-4x4-Portable-Air-Compressor-Car-Tyre-Inflator-Tire-Deflator-4wd-/140884948381?pt=AU_Car_Parts_Accessories&hash=item20cd65b59d)

Hi all, Just a follow up. I changed the cable that was in the car already and swapped it for 6BS. This has sorted the problem. There is minimal voltage drop through the cable and the compressor is now working as I wanted it to. Now I need to go for a run down the beach to drop the tyre...

Thanks for the replies. It gives me some places to start to sort this out. I have removed it from the car and will recheck it.

Hi all, I have recently attempted to mount my 12v compressor and a 9 ltr air tank into the Nav. The compressor is mounted in a box in the tray. I already had some wiring coming from one of the front batteries to where the compressor is mounted that was previously used to run the 80ltr Waeco...

Here is a copy of the frame plan for a canvas enclosed lockable canopy. I haven't included any measurements on this plan but overall length is approx 1557mm and 1487mm wide (around the tub), 1300mm wide and 1557mm long at the top of the frame and will be 500mm high from the tub to the top of...

I got my 09 D22 STR with 23000 klm on the clock. The standard B'stone Dueller A/Ts were stuffed at 35000 klms. It looked like the rear tyres were wearing in the middle of the tyre and I asked if the tyres were over inflated. The tyre guy told me that it was more likely to be from not...

Swains Canvas. Only a quote and they will measure off the canopy when it's finished. Canopy made out of PVC Canvas with 4 clear windows including installation.