Tray to Tub swap

Nissan Navara Forum

Help Support Nissan Navara Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

NobodyKnows

Member
Joined
Dec 26, 2024
Messages
3
Reaction score
0
Location
Central Coast NSW
Hey All,
Looking to swap my tray to a tub
2012 Japanese born D22 2.5ltr
Will any d22 tub fit or does it have to be specific Japanese model.
I’ve been told different countries have different chassis width/length?
Thank You All
 
are you sure its japan made?
they stopped japan d22 production in 2007.

odds are the tubs are all the same. tho you never quite know with the change in factory.
 
There was a cyclone or a flood or something in Thailand in 2011/2012 that shut down the Nissan plant that made D22's, so Nissan made them in Japan for a short time. So yours is very likely Japan built.

Mine is late 2012 built, but built in Thailand, so it can be confusing.

It's the tub length that varies, not the chassis rails. They will all fit. The tailgate is different after 2009, but that's purely cosmetic.
 
There was a cyclone or a flood or something in Thailand in 2011/2012 that shut down the Nissan plant that made D22's, so Nissan made them in Japan for a short time. So yours is very likely Japan built.

Mine is late 2012 built, but built in Thailand, so it can be confusing.

It's the tub length that varies, not the chassis rails. They will all fit. The tailgate is different after 2009, but that's purely cosmetic.
Thank you so much.noob question what rating of difficulty to remove tray and attach tub.
 
Thank you so much.noob question what rating of difficulty to remove tray and attach tub.
easy enough if you have something to lift the tray off with, its 6 or 8 bolts. otherwise the hard bit is sorting the wiring and that depends on what hack job was done to it and what the tub comes with.
 
Back
Top