winch

[Sammyd22]

does anyone know the stud patteren on the genuine nissan navara winch bar? im looking at winches on ebay and i wanna make sure that it wil fit the winch bar ill be buying from nissan the measurements i have are 254mm by 114.3 mm

 

[ONLOCK]

Most winches are the same bolt up size, generally the only thing that differs is the length of the motor and gearbox, if in doubt just look up the dimensions of a tigerz or warn winch

 

[Sammyd22]

what about over all size the winch is 562mm 160mm 218mm

 

[Old.Tony]

The mounting bolts that join the winch to the bar should be 254mm horizontally apart and 114mm vertically apart. 562mm of width makes for a big winch, the Tigerz 12,000lb winch is 537mm.

 

[Sammyd22]

thats alright but i still need to know if the 562 will fit the nissan bar other wise i need to look at something else or the arb bar i have asked nissan but they are no help and will not check for me

 

[Old.Tony]

The thing that's likely to get in your way is the chassis rails, so if you measure between those and they're more than 562mm apart you won't have a problem.