G'day everyone, my name is Ash and ive not long owned a 08 D40 stx thats pretty stock. Any hints tips whould be greatly appreciated. Im planning on a 2" lift, running on 33"s with a good looking snorkel which i plan to do asap. thanks for your help.
New Navara owner..... mods ?
- Thread starter Ash.stx
- Start date
Help Support Nissan Navara Forum:
Welcome to the forum!
Consider a catch can and an EGR block as well. If it's a manual, put some money aside to replace the flywheel with a single mass unit and a heavy duty clutch.
If you find it underpowered, I'd clean the inside of the intercooler (after you fit the catch can) and if you're still not happy talk to Robert @ ChipIt. Wait for their new series of chips, about $1700 I think he said, and it'll do lots more than your average fuel rail pressure raiser.
Consider a catch can and an EGR block as well. If it's a manual, put some money aside to replace the flywheel with a single mass unit and a heavy duty clutch.
If you find it underpowered, I'd clean the inside of the intercooler (after you fit the catch can) and if you're still not happy talk to Robert @ ChipIt. Wait for their new series of chips, about $1700 I think he said, and it'll do lots more than your average fuel rail pressure raiser.
gday Ash.
i agree with all of the above ^^^
The only thing i could add is, put some under body protection on it as well the transfer is a little low and is easily damaged. Brown davis or arb make decent 3mm gaurds
i agree with all of the above ^^^
The only thing i could add is, put some under body protection on it as well the transfer is a little low and is easily damaged. Brown davis or arb make decent 3mm gaurds
scottybobcat
2014 muster sponsor
What the others said and welcome to the forum
